# GC Calibration bug?

**URL:** <https://forums.maslowcnc.com/t/gc-calibration-bug/10481>\
**Category:** Ground Control\
**Created:** [July 11, 2019, 5:08pm UTC](https://forums.maslowcnc.com/t/gc-calibration-bug/10481 "2019-07-11T17:08:18Z")\
**Posts on this page:** 1\
**Showing post:** 3

<div class="post-metadata">

**Author:** ![WoodCutter4](https://avatars.discourse-cdn.com/v4/letter/w/bc79bd/32.png) [@WoodCutter4](https://forums.maslowcnc.com/u/WoodCutter4)\
**Post date:** [July 11, 2019, 8:26pm UTC](https://forums.maslowcnc.com/t/gc-calibration-bug/10481/3 "2019-07-11T20:26:31Z")

</div>

> [@CAJones](#):
>
> Am I missing something here? Is this a bug or does someone know of a workaround (like direct edit of .ini file)

@CAJones, please upload, or copy/paste the contents of, your ini file here. Perhaps there is something odd, like what you read in the other recent post [“GC Calibration bug?” post](https://forums.maslowcnc.com/t/calibrating-cut-dimensions/10415).

---

_[View the full topic](https://forums.maslowcnc.com/t/gc-calibration-bug/10481)._