# GCodeClean hits v1.0.1 🎉

**URL:** <https://forums.maslowcnc.com/t/gcodeclean-hits-v1-0-1/17995>\
**Category:** Software\
**Tags:** gcode\
**Created:** [May 7, 2022, 7:05am UTC](https://forums.maslowcnc.com/t/gcodeclean-hits-v1-0-1/17995 "2022-05-07T07:05:46Z")\
**Posts on this page:** 1\
**Showing post:** 40

<div class="post-metadata">

**Author:** ![md8n](https://yyz1.discourse-cdn.com/flex031/user_avatar/forums.maslowcnc.com/md8n/32/28197_2.png) [@md8n](https://forums.maslowcnc.com/u/md8n)\
**Post date:** [December 12, 2022, 1:07am UTC](https://forums.maslowcnc.com/t/gcodeclean-hits-v1-0-1/17995/40 "2022-12-12T01:07:22Z")

</div>

# GCodeClean goes to v1.1.2

[Releases · md8n/GCodeClean (github.com)](https://github.com/md8n/GCodeClean/releases)

This is a first step in getting GCodeClean on .net 7 - plus I also replaced the library I was using for the console (terminal) behaviour to something a little newer.

Getting the build working for ARM (Raspberry Pi) with Native AOT (see above) looks to be a little tricky - so you won’t find a pre-built binary for that yet. I may revert to cross-gen compilation for the Pi stuff (so not a single file, and quite a bit bigger) but we’ll see …

---

_[View the full topic](https://forums.maslowcnc.com/t/gcodeclean-hits-v1-0-1/17995)._