# GCodeClean now has a GUI

**URL:** <https://forums.maslowcnc.com/t/gcodeclean-now-has-a-gui/20054>\
**Category:** Software\
**Tags:** gcode\
**Created:** [March 7, 2024, 12:47am UTC](https://forums.maslowcnc.com/t/gcodeclean-now-has-a-gui/20054 "2024-03-07T00:47:18Z")\
**Posts on this page:** 1\
**Page:** 1

<div class="post-metadata">

**Author:** ![md8n](https://yyz1.discourse-cdn.com/flex031/user_avatar/forums.maslowcnc.com/md8n/32/28197_2.png) [@md8n](https://forums.maslowcnc.com/u/md8n)\
**Post date:** [March 7, 2024, 12:47am UTC](https://forums.maslowcnc.com/t/gcodeclean-now-has-a-gui/20054/1 "2024-03-07T00:47:18Z")

</div>

Well I finally got a GUI made for GCodeClean.  
Original GCodeClean - the command line version - is still at [md8n/GCodeClean](https://github.com/md8n/GCodeClean)  
The new GUI, which uses almost all of the original code, is at [md8n/GCodeCleanGUI](https://github.com/md8n/GCodeCleanGUI)

There is a pre-built release, but only for Windows [Releases · md8n/GCodeCleanGUI (github.com)](https://github.com/md8n/GCodeCleanGUI/releases).

IMPORTANT - this is a ‘side-loaded’ Windows App. So, the first time you install it you have to use `Install.ps1` to set things up correctly. After that you’ll be able to use the regular `.msix` file for any subsequent installation.

Also this was a get-it-out-the-door project. So none of the ‘clean’ options are supported, only defaults are used. If you’re a regular GCodeClean user (and who isn’t) then please let me know what options you regularly use and I will prioritise their inclusion in the GUI.