# Getting re-started

**URL:** <https://forums.maslowcnc.com/t/getting-re-started/18028>\
**Category:** Troubleshooting\
**Created:** [May 22, 2022, 9:45pm UTC](https://forums.maslowcnc.com/t/getting-re-started/18028 "2022-05-22T21:45:08Z")\
**Posts on this page:** 1\
**Showing post:** 5

<div class="post-metadata">

**Author:** ![Orob](https://yyz1.discourse-cdn.com/flex031/user_avatar/forums.maslowcnc.com/orob/32/16344_2.png) [@Orob](https://forums.maslowcnc.com/u/Orob)\
**Post date:** [May 26, 2022, 5:32pm UTC](https://forums.maslowcnc.com/t/getting-re-started/18028/5 "2022-05-26T17:32:54Z")

</div>

There is some information here as well:  
[webcontrol basics](https://forums.maslowcnc.com/t/webcontrol-how-to-use-the-basic-and-advanced-features/13241)  
[maslow manual](https://forums.maslowcnc.com/t/the-maslow-manual-v-0-001/12368/3)  
setting up webcontrol on a linux pc will be very similar to setting it up on a raspberry pi without gpio menu option functionality. Most do not use this anyway.

---

_[View the full topic](https://forums.maslowcnc.com/t/getting-re-started/18028)._