# Got repo for Docs? e.g. https://www.maslowcnc.com/assembling-the-router

**URL:** <https://forums.maslowcnc.com/t/got-repo-for-docs-e-g-https-www-maslowcnc-com-assembling-the-router/21593>\
**Category:** Site Feedback\
**Created:** [June 20, 2024, 4:48pm UTC](https://forums.maslowcnc.com/t/got-repo-for-docs-e-g-https-www-maslowcnc-com-assembling-the-router/21593 "2024-06-20T16:48:27Z")\
**Posts on this page:** 2\
**Page:** 1

<div class="post-metadata">

**Author:** ![AzaB2C](https://yyz1.discourse-cdn.com/flex031/user_avatar/forums.maslowcnc.com/azab2c/32/22286_2.png) [@AzaB2C](https://forums.maslowcnc.com/u/AzaB2C)\
**Post date:** [June 20, 2024, 4:48pm UTC](https://forums.maslowcnc.com/t/got-repo-for-docs-e-g-https-www-maslowcnc-com-assembling-the-router/21593/1 "2024-06-20T16:48:27Z")

</div>

Hello! Got repo for Docs, e.g. [Assembling the router — Maslow](https://www.maslowcnc.com/assembling-the-router) ? Didn’t see something that looked like a docs repo in [https://github.com/orgs/MaslowCNC/repositories](https://github.com/orgs/MaslowCNC/repositories).

If so, consider adding a “edit” or “contribute” link so folks can submit pull requests with changes for your consideration.

Reason I ask… Would like to share feedback that may help folks with assembly and setup.

Cheers!

---

<div class="post-metadata">

**Author:** ![bar](https://yyz1.discourse-cdn.com/flex031/user_avatar/forums.maslowcnc.com/bar/32/10_2.png) [@bar](https://forums.maslowcnc.com/u/bar)\
**Post date:** [June 20, 2024, 5:07pm UTC](https://forums.maslowcnc.com/t/got-repo-for-docs-e-g-https-www-maslowcnc-com-assembling-the-router/21593/2 "2024-06-20T17:07:06Z")

</div>

We used to have the assembly guide as a wiki page on a github repo which made is so anyone could edit it. It was nice for maintainability, but also it was maybe a little more DIY looking. I’m open to going back to something like that.

A wiki forums post would also be an option.