# Ground Control bugs fixed?

**URL:** <https://forums.maslowcnc.com/t/ground-control-bugs-fixed/9058>\
**Category:** Software\
**Created:** [March 8, 2019, 11:42pm UTC](https://forums.maslowcnc.com/t/ground-control-bugs-fixed/9058 "2019-03-08T23:42:08Z")\
**Posts on this page:** 5\
**Page:** 1

<div class="post-metadata">

**Author:** ![Explorer7263](https://yyz1.discourse-cdn.com/flex031/user_avatar/forums.maslowcnc.com/explorer7263/32/9059_2.png) [@Explorer7263](https://forums.maslowcnc.com/u/Explorer7263)\
**Post date:** [March 8, 2019, 11:42pm UTC](https://forums.maslowcnc.com/t/ground-control-bugs-fixed/9058/1 "2019-03-08T23:42:08Z")

</div>

I have read that a few of the latest updates have had issues. Have they been worked out? I would like to catch up on the latest version but I am a bit nervous. my problem lies in my lack of computer skills. Which is compounded by having to have Bee set my computer up with a Liniux bootstick to make it work. Does anyone have a step by painstakingly simple step for installing the latest versions of Ground Control and Arduino firmware so I don’t give my harddrive a stroke.

---

<div class="post-metadata">

**Author:** ![TheMerryYeoman](https://yyz1.discourse-cdn.com/flex031/user_avatar/forums.maslowcnc.com/themerryyeoman/32/8009_2.png) [@TheMerryYeoman](https://forums.maslowcnc.com/u/TheMerryYeoman)\
**Post date:** [March 9, 2019, 3:58am UTC](https://forums.maslowcnc.com/t/ground-control-bugs-fixed/9058/2 "2019-03-09T03:58:07Z")

</div>

I’m sorry @Explorer7263 but I am mostly in appreciation of your post and hoping to hear tips and tricks that I can glean from your efforts 😜. I’m also interested in what bootstick is and how much it could help me get set up.  
I will say that (as far as I know) the latest version of update isn’t ready for Windows but the one before it, 1.25 is only lacking updated wording in calibration instructions.

---

<div class="post-metadata">

**Author:** ![WoodCutter4](https://avatars.discourse-cdn.com/v4/letter/w/bc79bd/32.png) [@WoodCutter4](https://forums.maslowcnc.com/u/WoodCutter4)\
**Post date:** [March 16, 2019, 4:52pm UTC](https://forums.maslowcnc.com/t/ground-control-bugs-fixed/9058/3 "2019-03-16T16:52:29Z")

</div>

I get the below error with v1.26 GC, FW and arduino v1.8.9 on Windows 10. Would have been nice to know before taking the time to try it…back to 1.25.

 ![image](https://canada1.discourse-cdn.com/flex031/uploads/maslowcnc/original/2X/d/d6064e9eb03733ab06b6ad2c7f5ca18b065ea2e0.png)

---

<div class="post-metadata">

**Author:** ![Jamtek](https://yyz1.discourse-cdn.com/flex031/user_avatar/forums.maslowcnc.com/jamtek/32/12604_2.png) [@Jamtek](https://forums.maslowcnc.com/u/Jamtek)\
**Post date:** [March 16, 2019, 5:20pm UTC](https://forums.maslowcnc.com/t/ground-control-bugs-fixed/9058/4 "2019-03-16T17:20:01Z")

</div>

Strange, the Graphic drivers are system files and not part of GC. Are you able to get GC 1.25 working?

Did you recently get a Windows update.

> **[Microsoft Issues Windows 10 Upgrade Warning](https://www.forbes.com/sites/gordonkelly/2019/03/09/microsoft-windows-10-upgrade-problem-price-cost-update/#5aa3e16f4364)**
>
> Windows 10 upgrades suffer a serious problem...

---

<div class="post-metadata">

**Author:** ![WoodCutter4](https://avatars.discourse-cdn.com/v4/letter/w/bc79bd/32.png) [@WoodCutter4](https://forums.maslowcnc.com/u/WoodCutter4)\
**Post date:** [March 16, 2019, 5:26pm UTC](https://forums.maslowcnc.com/t/ground-control-bugs-fixed/9058/5 "2019-03-16T17:26:21Z")

</div>

I went back to “holey fw update”, which is 1.25 plus Joshua’s updates, along with his GC (v1.25 plus his updates and I can’t get my motors to move. The only difference is I downloaded the latest Arduino fw 1.8.9. I’m going back to 1.8.8 to see if that helps.