# Help! Trouble getting two original Maslow units back working **URL:** \ **Category:** Troubleshooting\ **Created:** [January 8, 2025, 8:39pm UTC](https://forums.maslowcnc.com/t/help-trouble-getting-two-original-maslow-units-back-working/23139 "2025-01-08T20:39:25Z")\ **Posts on this page:** 1\ **Showing post:** 5
**Author:** ![TimS](https://yyz1.discourse-cdn.com/flex031/user_avatar/forums.maslowcnc.com/tims/32/17329_2.png) [@TimS](https://forums.maslowcnc.com/u/TimS)\ **Post date:** [January 13, 2025, 6:33pm UTC](https://forums.maslowcnc.com/t/help-trouble-getting-two-original-maslow-units-back-working/23139/5 "2025-01-13T18:33:18Z")
I’m on discord, infact there is a slightly used Maslow discord someone made. I will DM you my contact info. Here is some help. Webcontrol link is in there. Firmware can be installed via webcontrol. I do not use a rasp pi so I can’t help much there. I just use an old laptop. > [@WebControl: how to use the basic and advanced features](https://forums.maslowcnc.com/t/webcontrol-how-to-use-the-basic-and-advanced-features/13241): > > The purpose of this wiki entry is to describe how to fully use the basic and advanced features of webcontrol. This is intended to be more than just a basic overview, with links, videos and instructions. Webcontrol can run on multiple operating systems: Windows 10 [[Maslow WebControl on Windows10] ](https://www.youtube.com/watch?v=oPjnMisPen8) UPDATE: github respository moved, so link to get to the latest release, go to [Releases · WebControlCNC/WebControl · GitHub](http://github.com/webcontrolcnc/webcontrol/releases) and scroll down to the green LATEST RELEASE tag [image] Ra… > **[Join the maslowcnc Discord Server!](https://discord.com/invite/XfsuQtSf)** > > Check out the maslowcnc community on Discord - hang out with 44 other members and enjoy free voice and text chat. --- _[View the full topic](https://forums.maslowcnc.com/t/help-trouble-getting-two-original-maslow-units-back-working/23139)._