# Help with troubleshooting (unsure how to label this, yet to get it to cut)

**URL:** <https://forums.maslowcnc.com/t/help-with-troubleshooting-unsure-how-to-label-this-yet-to-get-it-to-cut/25134>\
**Category:** Troubleshooting\
**Created:** [November 2, 2025, 2:22am UTC](https://forums.maslowcnc.com/t/help-with-troubleshooting-unsure-how-to-label-this-yet-to-get-it-to-cut/25134 "2025-11-02T02:22:06Z")\
**Posts on this page:** 1\
**Showing post:** 11

<div class="post-metadata">

**Author:** ![bar](https://yyz1.discourse-cdn.com/flex031/user_avatar/forums.maslowcnc.com/bar/32/10_2.png) [@bar](https://forums.maslowcnc.com/u/bar)\
**Post date:** [November 3, 2025, 8:50pm UTC](https://forums.maslowcnc.com/t/help-with-troubleshooting-unsure-how-to-label-this-yet-to-get-it-to-cut/25134/11 "2025-11-03T20:50:33Z")

</div>

Does the jogging work normally? It looks like you were able to get to the start of the cut OK?

I think that the issue here might be that the gcode file has a super super slow feedrate for some reason so the machine looks like it isn’t moving.

Can you give this test gcode a try?

> [@Test Gcode Logo File](https://forums.maslowcnc.com/t/test-gcode-logo-file/25120):
>
> There was a request for a test gcode of our logo so I made one: [https://abundance.maslowcnc.com/run/BarbourSmith/TestLogoGcode](https://abundance.maslowcnc.com/run/BarbourSmith/TestLogoGcode) Just enter the wood thickness and the router bit size that you want to use to cut it and then download the gcode.

---

_[View the full topic](https://forums.maslowcnc.com/t/help-with-troubleshooting-unsure-how-to-label-this-yet-to-get-it-to-cut/25134)._