# Help with troubleshooting (unsure how to label this, yet to get it to cut)

**URL:** <https://forums.maslowcnc.com/t/help-with-troubleshooting-unsure-how-to-label-this-yet-to-get-it-to-cut/25134>\
**Category:** Troubleshooting\
**Created:** [November 2, 2025, 2:22am UTC](https://forums.maslowcnc.com/t/help-with-troubleshooting-unsure-how-to-label-this-yet-to-get-it-to-cut/25134 "2025-11-02T02:22:06Z")\
**Posts on this page:** 1\
**Showing post:** 20

<div class="post-metadata">

**Author:** ![ian\_ab](https://avatars.discourse-cdn.com/v4/letter/i/a587f6/32.png) [@ian\_ab](https://forums.maslowcnc.com/u/ian_ab)\
**Post date:** [November 8, 2025, 4:39am UTC](https://forums.maslowcnc.com/t/help-with-troubleshooting-unsure-how-to-label-this-yet-to-get-it-to-cut/25134/20 "2025-11-08T04:39:35Z")

</div>

> [@AlexB](#):
>
> I tried updating it to 1.13.

This looks like the same problem I had when running V1.13, Bar found some problems with the firmware. Try this version:

> [@Interstitial Firmware Releases](https://forums.maslowcnc.com/t/interstitial-firmware-releases/20215/543):
>
> Here is a release of the latest dev version which fixes some bugs with parsing the .yaml file as discussed [here](https://forums.maslowcnc.com/t/version-1-13-has-some-problems/25101/14).
> 
> [firmware.bin](https://forums.maslowcnc.com/uploads/short-url/3rHjDcC2aHepmMXQLm3wqEnOELr.bin) (1.9 MB)

---

_[View the full topic](https://forums.maslowcnc.com/t/help-with-troubleshooting-unsure-how-to-label-this-yet-to-get-it-to-cut/25134)._