# How Do I Install and Calibrate? Pi to WebControl to Holey for complete newbs

**URL:** <https://forums.maslowcnc.com/t/how-do-i-install-and-calibrate-pi-to-webcontrol-to-holey-for-complete-newbs/12660>\
**Category:** How do I ... ?\
**Tags:** calibration\
**Created:** [March 15, 2020, 11:09pm UTC](https://forums.maslowcnc.com/t/how-do-i-install-and-calibrate-pi-to-webcontrol-to-holey-for-complete-newbs/12660 "2020-03-15T23:09:34Z")\
**Posts on this page:** 5\
**Page:** 2

<div class="post-metadata">

**Author:** ![izaklast](https://yyz1.discourse-cdn.com/flex031/user_avatar/forums.maslowcnc.com/izaklast/32/15236_2.png) [@izaklast](https://forums.maslowcnc.com/u/izaklast)\
**Post date:** [March 23, 2020, 1:43pm UTC](https://forums.maslowcnc.com/t/how-do-i-install-and-calibrate-pi-to-webcontrol-to-holey-for-complete-newbs/12660/22 "2020-03-23T13:43:05Z")

</div>

@garisonr I had trouble getting holey to work until MadGrizzle helped me. I had the same experience where I used the old installed (included webMPC) and holey just wouldn’t cooperate. The pi bakery and XML recipe method works well. After hitting “update to holey”, webcontrol will reset and re-connect and then should work fine.

---

<div class="post-metadata">

**Author:** ![madgrizzle](https://yyz1.discourse-cdn.com/flex031/user_avatar/forums.maslowcnc.com/madgrizzle/32/1372_2.png) [@madgrizzle](https://forums.maslowcnc.com/u/madgrizzle)\
**Post date:** [March 23, 2020, 2:48pm UTC](https://forums.maslowcnc.com/t/how-do-i-install-and-calibrate-pi-to-webcontrol-to-holey-for-complete-newbs/12660/23 "2020-03-23T14:48:47Z")

</div>

> [@garisonr](#):
>
> Outside of updating to holey in the actions menu, is there anything else I needed to do?

Is there a big red ‘button’ in top right with the words “Fake Servo” in it?

---

<div class="post-metadata">

**Author:** ![dlang](https://yyz1.discourse-cdn.com/flex031/user_avatar/forums.maslowcnc.com/dlang/32/859_2.png) [@dlang](https://forums.maslowcnc.com/u/dlang)\
**Post date:** [March 23, 2020, 2:53pm UTC](https://forums.maslowcnc.com/t/how-do-i-install-and-calibrate-pi-to-webcontrol-to-holey-for-complete-newbs/12660/24 "2020-03-23T14:53:21Z")

</div>

I had a similar problem and found that fake servo had somehow gotten enabled, I  
believe that current versions show this in the status at the top.

---

<div class="post-metadata">

**Author:** ![garisonr](https://avatars.discourse-cdn.com/v4/letter/g/ecc23a/32.png) [@garisonr](https://forums.maslowcnc.com/u/garisonr)\
**Post date:** [March 23, 2020, 5:19pm UTC](https://forums.maslowcnc.com/t/how-do-i-install-and-calibrate-pi-to-webcontrol-to-holey-for-complete-newbs/12660/25 "2020-03-23T17:19:37Z")

</div>

Yep. Need to disable it?

---

<div class="post-metadata">

**Author:** ![madgrizzle](https://yyz1.discourse-cdn.com/flex031/user_avatar/forums.maslowcnc.com/madgrizzle/32/1372_2.png) [@madgrizzle](https://forums.maslowcnc.com/u/madgrizzle)\
**Post date:** [March 23, 2020, 5:33pm UTC](https://forums.maslowcnc.com/t/how-do-i-install-and-calibrate-pi-to-webcontrol-to-holey-for-complete-newbs/12660/26 "2020-03-23T17:33:34Z")

</div>

Yes. Click that ‘button’.

[Previous page](https://forums.maslowcnc.com/t/how-do-i-install-and-calibrate-pi-to-webcontrol-to-holey-for-complete-newbs/12660.md?page=1)