# I just wanna have fun **URL:** \ **Category:** No Judgement\ **Created:** [August 26, 2018, 7:42pm UTC](https://forums.maslowcnc.com/t/i-just-wanna-have-fun/6166 "2018-08-26T19:42:53Z")\ **Posts on this page:** 8\ **Page:** 2
**Author:** ![dlang](https://yyz1.discourse-cdn.com/flex031/user_avatar/forums.maslowcnc.com/dlang/32/859_2.png) [@dlang](https://forums.maslowcnc.com/u/dlang)\ **Post date:** [August 30, 2018, 11:27pm UTC](https://forums.maslowcnc.com/t/i-just-wanna-have-fun/6166/21 "2018-08-30T23:27:11Z")
just paypal (although you can use a cc through paypal) if it’s a hotel, check with them on receiving packages, I’ve run into some strange rules/fees. David Lang ---
**Author:** ![ManOfScience](https://avatars.discourse-cdn.com/v4/letter/m/47e85d/32.png) [@ManOfScience](https://forums.maslowcnc.com/u/ManOfScience)\ **Post date:** [August 31, 2018, 3:55am UTC](https://forums.maslowcnc.com/t/i-just-wanna-have-fun/6166/22 "2018-08-31T03:55:48Z")
> [@dlang](#): > > …I have heard that pillagethenburn may have dropped out so it may be hard to > purchase his kit… He just emailed me that he will be putting together another batch of kits soon. If the Etsy link says “Sold Out”, Message him (on [Etsy](https://www.etsy.com/listing/558743441/maslow-triangulation-linkage-kit) ) to get on his list if you want one. ---
**Author:** ![dlang](https://yyz1.discourse-cdn.com/flex031/user_avatar/forums.maslowcnc.com/dlang/32/859_2.png) [@dlang](https://forums.maslowcnc.com/u/dlang)\ **Post date:** [August 31, 2018, 4:09am UTC](https://forums.maslowcnc.com/t/i-just-wanna-have-fun/6166/23 "2018-08-31T04:09:14Z")
> > [@dlang](#): > > > > …I have heard that pillagethenburn may have dropped out so it may be hard to > > purchase his kit… > > He just emailed me that he will be putting together another batch of kits soon. good to hear. David Lang ---
**Author:** ![Bee](https://yyz1.discourse-cdn.com/flex031/user_avatar/forums.maslowcnc.com/bee/32/2160_2.png) [@Bee](https://forums.maslowcnc.com/u/Bee)\ **Post date:** [September 2, 2018, 7:52am UTC](https://forums.maslowcnc.com/t/i-just-wanna-have-fun/6166/24 "2018-09-02T07:52:15Z")
check this out - > [@Triangulation linkage kits explained](https://forums.maslowcnc.com/t/triangulation-linkage-kits-explained/2736): > > I’ve written a document explaining the choices. It’s largely informational but anyone with a Maslow kit shipped before 4/15/2018 may want to look at their options. [https://www.evernote.com/l/AkVPAdcpoR9NnatdCZ3vSZfw32mK2Tw2yIE](https://www.evernote.com/l/AkVPAdcpoR9NnatdCZ3vSZfw32mK2Tw2yIE) Thank you Thank you ---
**Author:** ![kenzoabiko](https://avatars.discourse-cdn.com/v4/letter/k/a88e57/32.png) [@kenzoabiko](https://forums.maslowcnc.com/u/kenzoabiko)\ **Post date:** [September 11, 2018, 1:22am UTC](https://forums.maslowcnc.com/t/i-just-wanna-have-fun/6166/25 "2018-09-11T01:22:45Z")
Hello @oliverilg, we bought a Maslow too, we are in Sao Paulo Brazil, where are you located? Maybe we can exchange some info. Right now we are looking to buy the router, any ideas what we can find in the Brazilian market? Cheers. ---
**Author:** ![oliverilg](https://avatars.discourse-cdn.com/v4/letter/o/a9a28c/32.png) [@oliverilg](https://forums.maslowcnc.com/u/oliverilg)\ **Post date:** [September 11, 2018, 9:42pm UTC](https://forums.maslowcnc.com/t/i-just-wanna-have-fun/6166/26 "2018-09-11T21:42:07Z")
Hi, @kenzoabiko, I’m located in Campinas. Regarding the router, I’m kind of radical with my powertools. I prefer to spend a bit more on Bosch equipment and, if the tool I want is from Makita, that’s ok too. It is important NOT to buy a plunge router (was the mistake I did) and to install the Z-axis control (I ordered mine after the kit – another mistake). The correct router is the GFF 1600 from Bosch. It is also the cheaper one. Feel free to e-mail me, if I can be of any help: [oliver@ilgnet.com](mailto:oliver@ilgnet.com). Per e-mail I can send you my phone too. ---
**Author:** ![TimS](https://yyz1.discourse-cdn.com/flex031/user_avatar/forums.maslowcnc.com/tims/32/17329_2.png) [@TimS](https://forums.maslowcnc.com/u/TimS)\ **Post date:** [June 22, 2024, 11:29pm UTC](https://forums.maslowcnc.com/t/i-just-wanna-have-fun/6166/30 "2024-06-22T23:29:04Z")
This is the same author that posted in the past reviving years old posts. Most likely a bot and I wouldn’t click any links ---
**Author:** ![jwolter](https://yyz1.discourse-cdn.com/flex031/user_avatar/forums.maslowcnc.com/jwolter/32/30787_2.png) [@jwolter](https://forums.maslowcnc.com/u/jwolter)\ **Post date:** [June 23, 2024, 12:28am UTC](https://forums.maslowcnc.com/t/i-just-wanna-have-fun/6166/31 "2024-06-23T00:28:57Z")
Ah, good point. I didn’t notice the link. Yeah, I’m going to delete that post. [Previous page](https://forums.maslowcnc.com/t/i-just-wanna-have-fun/6166.md?page=1)