# I submit myself to public shaming

**URL:** <https://forums.maslowcnc.com/t/i-submit-myself-to-public-shaming/20528>\
**Category:** Software\
**Created:** [April 4, 2024, 10:57pm UTC](https://forums.maslowcnc.com/t/i-submit-myself-to-public-shaming/20528 "2024-04-04T22:57:25Z")\
**Posts on this page:** 1\
**Showing post:** 2

<div class="post-metadata">

**Author:** ![bar](https://yyz1.discourse-cdn.com/flex031/user_avatar/forums.maslowcnc.com/bar/32/10_2.png) [@bar](https://forums.maslowcnc.com/u/bar)\
**Post date:** [April 5, 2024, 12:13am UTC](https://forums.maslowcnc.com/t/i-submit-myself-to-public-shaming/20528/2 "2024-04-05T00:13:56Z")

</div>

Totally fixable. Do you have a USB cable?

> [@Maslow #29 BuildLog](https://forums.maslowcnc.com/t/maslow-29-buildlog/20077/166):
>
> If you have a chance and a USB cable, can you run the “Full Install.bat” in this folder with the USB cable plugged in and the machine powered on (It needs the power-supply connected to program)?
> 
> That will fully erase your board and reset everything to factory defaults.
> 
> Edit: File was too large to upload, working on it
> 
> Edit2: Here we go: [Full Install — Maslow](https://www.maslowcnc.com/full-install)

This will wipe the ESP32 completely and re-install everything.

If you don’t have a PC computer and want to do it within platformio the commands

pio run -e wifi\_s3 -t erase

pio run -e wifi\_s3 -t uploadfs

Will erase it and then upload everything again. I think that they might work over WiFi, but they also might require a USB cable.

If you want to run those commands over USB you will want to comment these two lines out in the platformio.ini file:

 ![image](https://canada1.discourse-cdn.com/flex031/uploads/maslowcnc/original/3X/9/0/90485eb935780539f24eab4b095c42297970b613.png)

---

_[View the full topic](https://forums.maslowcnc.com/t/i-submit-myself-to-public-shaming/20528)._