# Inexpensive ways to test and tune the Maslow?

**URL:** <https://forums.maslowcnc.com/t/inexpensive-ways-to-test-and-tune-the-maslow/23600>\
**Category:** Uncategorized\
**Created:** [March 23, 2025, 10:17pm UTC](https://forums.maslowcnc.com/t/inexpensive-ways-to-test-and-tune-the-maslow/23600 "2025-03-23T22:17:10Z")\
**Posts on this page:** 1\
**Showing post:** 4

<div class="post-metadata">

**Author:** ![James\_Presnail](https://yyz1.discourse-cdn.com/flex031/user_avatar/forums.maslowcnc.com/james_presnail/32/22952_2.png) [@James\_Presnail](https://forums.maslowcnc.com/u/James_Presnail)\
**Post date:** [March 24, 2025, 5:04pm UTC](https://forums.maslowcnc.com/t/inexpensive-ways-to-test-and-tune-the-maslow/23600/4 "2025-03-24T17:04:35Z")

</div>

this thread had some 3d printable options to try out

> [@Maslow plotter, or getting used to Maslow without spoiling wood](https://forums.maslowcnc.com/t/maslow-plotter-or-getting-used-to-maslow-without-spoiling-wood/21237/38):
>
> Thanks for the suggestions! It does fit without the pen holder screwed in (I didn’t bother reprinting after checking the model in Fusion and my measurements match your design). I printed with standard supports in Cura - the tree support generation wasn’t consistent so I used the standard ones for this. I’ll keep working on the threads - you can see in this pic they came out a bit like a ratchet gear on my printer, I’ll take a Dremel to them and see if I can get it working smoothly. Hopefully the…

---

_[View the full topic](https://forums.maslowcnc.com/t/inexpensive-ways-to-test-and-tune-the-maslow/23600)._