# InkScape SVG won't open in makercam

**URL:** <https://forums.maslowcnc.com/t/inkscape-svg-wont-open-in-makercam/9614>\
**Category:** CAD/CAM Software Tips\
**Created:** [April 21, 2019, 6:10pm UTC](https://forums.maslowcnc.com/t/inkscape-svg-wont-open-in-makercam/9614 "2019-04-21T18:10:47Z")\
**Posts on this page:** 17\
**Page:** 1

<div class="post-metadata">

**Author:** ![noexit](https://yyz1.discourse-cdn.com/flex031/user_avatar/forums.maslowcnc.com/noexit/32/12460_2.png) [@noexit](https://forums.maslowcnc.com/u/noexit)\
**Post date:** [April 21, 2019, 6:10pm UTC](https://forums.maslowcnc.com/t/inkscape-svg-wont-open-in-makercam/9614/1 "2019-04-21T18:10:47Z")

</div>

I’m still trying to get the hang of a workflow, and I’m having some issues. Here’s what I’m doing:

Fusion 360 for dimensional drawing, which I’m exporting as a dxf  
Convert the dxf to svg with [dxfconverter.org](http://dxfconverter.org)  
Open the svg in Inkscape to clean it up and combine paths  
Open in makercam

If I open my svg in Makercam right after I convert it, it looks great, but I can’t do a profile cut because the direct export from Fusion 360 is a bunch of paths. So I select the entire inside and combine in Inkscape, and the same with the outside, but when I open that in Makercam, all I see is a single vertical line.

When I tried to upload my svg into the forum, I got an error “Sorry, but we couldn’t determine the size of the image. Maybe your image is corrupted?”, so here’s a link in my Google Drive: [https://drive.google.com/open?id=1zzSGm5Zo4BlKgZjgm9bs7A0R\_Fb35PA2](https://drive.google.com/open?id=1zzSGm5Zo4BlKgZjgm9bs7A0R_Fb35PA2)

---

<div class="post-metadata">

**Author:** ![Gero](https://yyz1.discourse-cdn.com/flex031/user_avatar/forums.maslowcnc.com/gero/32/17487_2.png) [@Gero](https://forums.maslowcnc.com/u/Gero)\
**Post date:** [April 21, 2019, 6:25pm UTC](https://forums.maslowcnc.com/t/inkscape-svg-wont-open-in-makercam/9614/2 "2019-04-21T18:25:08Z")

</div>

The workflow is just (sorry) ‘crazy to follow’ 😉  
Just pulling on 2 nodes shows that this is asking for errors, double paths and not connected lines…

 ![image](https://canada1.discourse-cdn.com/flex031/uploads/maslowcnc/original/2X/7/790a9670b6dead5e2981c3eb571ed1cce744df40.png)

Why not g-code from the not within F360, or librecad → dxf to svg and them makercam, or freecad to g-code?

---

<div class="post-metadata">

**Author:** ![dlang](https://yyz1.discourse-cdn.com/flex031/user_avatar/forums.maslowcnc.com/dlang/32/859_2.png) [@dlang](https://forums.maslowcnc.com/u/dlang)\
**Post date:** [April 21, 2019, 6:46pm UTC](https://forums.maslowcnc.com/t/inkscape-svg-wont-open-in-makercam/9614/3 "2019-04-21T18:46:48Z")

</div>

The g-code generated by Fusion 360 is going to be better than what makercam  
produces, so skip the export/conversion/inkscape/makercam steps and just produce  
the g-code within Fusion 360 (use the maslow post-processor)

David Lang

---

<div class="post-metadata">

**Author:** ![theHipNerd](https://yyz1.discourse-cdn.com/flex031/user_avatar/forums.maslowcnc.com/thehipnerd/32/8897_2.png) [@theHipNerd](https://forums.maslowcnc.com/u/theHipNerd)\
**Post date:** [April 21, 2019, 7:56pm UTC](https://forums.maslowcnc.com/t/inkscape-svg-wont-open-in-makercam/9614/4 "2019-04-21T19:56:06Z")

</div>

I agree with what the others said here. If you’re already in Fusion 360, it seems like a lot of extra work to use Inkscape and Makercam. I can see starting with Inkscape (especially for complex patterns), and importing that to Fusion, but not the other way around. The machining functions are not as simplified as Makercam, but once you learn how to use them, you can see how powerful they are.

---

<div class="post-metadata">

**Author:** ![noexit](https://yyz1.discourse-cdn.com/flex031/user_avatar/forums.maslowcnc.com/noexit/32/12460_2.png) [@noexit](https://forums.maslowcnc.com/u/noexit)\
**Post date:** [April 21, 2019, 9:59pm UTC](https://forums.maslowcnc.com/t/inkscape-svg-wont-open-in-makercam/9614/5 "2019-04-21T21:59:49Z")

</div>

That makes sense.

I’ve loaded the Maslow post and I have something ready to test, but one thing I can’t figure out is how to position the part on my sheet. I moved the part in F360, but the location of the G-Code output didn’t change.

---

<div class="post-metadata">

**Author:** ![noexit](https://yyz1.discourse-cdn.com/flex031/user_avatar/forums.maslowcnc.com/noexit/32/12460_2.png) [@noexit](https://forums.maslowcnc.com/u/noexit)\
**Post date:** [April 21, 2019, 11:57pm UTC](https://forums.maslowcnc.com/t/inkscape-svg-wont-open-in-makercam/9614/6 "2019-04-21T23:57:45Z")

</div>

No matter how I try to position my stock, my part is always in a strange place.

 ![57%20PM](https://canada1.discourse-cdn.com/flex031/uploads/maslowcnc/original/2X/2/294d1d7f6e3812b54654195645c8b583b7e4386a.png)  
 ![27%20PM](https://canada1.discourse-cdn.com/flex031/uploads/maslowcnc/original/2X/8/80ea016b0b61b673277af7a33006f417c181ea25.png)

---

<div class="post-metadata">

**Author:** ![noexit](https://yyz1.discourse-cdn.com/flex031/user_avatar/forums.maslowcnc.com/noexit/32/12460_2.png) [@noexit](https://forums.maslowcnc.com/u/noexit)\
**Post date:** [April 22, 2019, 1:16am UTC](https://forums.maslowcnc.com/t/inkscape-svg-wont-open-in-makercam/9614/7 "2019-04-22T01:16:37Z")

</div>

I gave up on trying to locate it on the plywood and just set the material to the width of the object, then manually positioned it in Ground Control. The first test, I forgot to select the whole object when I generated the gcode, but it cut pretty well. The only complaint so far is that the z-axis retracts at the end of every pass, and that’s the most time consuming thing.

 ![IMG_20190421_171234](https://canada1.discourse-cdn.com/flex031/uploads/maslowcnc/original/2X/e/e32b7a11059909ab9c3d477eedd90c7e5440b2dc.jpeg)

---

<div class="post-metadata">

**Author:** ![TheMerryYeoman](https://yyz1.discourse-cdn.com/flex031/user_avatar/forums.maslowcnc.com/themerryyeoman/32/8009_2.png) [@TheMerryYeoman](https://forums.maslowcnc.com/u/TheMerryYeoman)\
**Post date:** [April 22, 2019, 2:28am UTC](https://forums.maslowcnc.com/t/inkscape-svg-wont-open-in-makercam/9614/8 "2019-04-22T02:28:48Z")

</div>

Yes. I was wondering if the retraction you speak of could be limited. So very time consuming.

---

<div class="post-metadata">

**Author:** ![theHipNerd](https://yyz1.discourse-cdn.com/flex031/user_avatar/forums.maslowcnc.com/thehipnerd/32/8897_2.png) [@theHipNerd](https://forums.maslowcnc.com/u/theHipNerd)\
**Post date:** [April 22, 2019, 6:49am UTC](https://forums.maslowcnc.com/t/inkscape-svg-wont-open-in-makercam/9614/9 "2019-04-22T06:49:22Z")

</div>

Your origin is not anywhere near your model. When you import an SVG into Fusion, you need to move it to the origin after you import. You can find how-tos, just look them up.

---

<div class="post-metadata">

**Author:** ![noexit](https://yyz1.discourse-cdn.com/flex031/user_avatar/forums.maslowcnc.com/noexit/32/12460_2.png) [@noexit](https://forums.maslowcnc.com/u/noexit)\
**Post date:** [April 22, 2019, 7:57pm UTC](https://forums.maslowcnc.com/t/inkscape-svg-wont-open-in-makercam/9614/10 "2019-04-22T19:57:35Z")

</div>

> [@theHipNerd](#):
>
> Your origin is not anywhere near your model. When you import an SVG into Fusion

I’ve abandoned SVGs altogether. I’m drawing directly in Fusion now.

I see what you’re talking about though. It’s in the upper right, exactly where Ground Control thinks it is.

---

<div class="post-metadata">

**Author:** ![noexit](https://yyz1.discourse-cdn.com/flex031/user_avatar/forums.maslowcnc.com/noexit/32/12460_2.png) [@noexit](https://forums.maslowcnc.com/u/noexit)\
**Post date:** [April 22, 2019, 8:01pm UTC](https://forums.maslowcnc.com/t/inkscape-svg-wont-open-in-makercam/9614/11 "2019-04-22T20:01:08Z")

</div>

> [@TheMerryYeoman](#):
>
> Yes. I was wondering if the retraction you speak of could be limited. So very time consuming.

I can limit how much it retracts, but I’ll have to play with it a bit more to see if I can get rid of it altogether.

---

<div class="post-metadata">

**Author:** ![theHipNerd](https://yyz1.discourse-cdn.com/flex031/user_avatar/forums.maslowcnc.com/thehipnerd/32/8897_2.png) [@theHipNerd](https://forums.maslowcnc.com/u/theHipNerd)\
**Post date:** [April 22, 2019, 8:04pm UTC](https://forums.maslowcnc.com/t/inkscape-svg-wont-open-in-makercam/9614/12 "2019-04-22T20:04:56Z")

</div>

> [@noexit](#):
>
> I’ve abandoned SVGs altogether. I’m drawing directly in Fusion now.
> 
> I see what you’re talking about though. It’s in the upper right, exactly where Ground Control thinks it is.

If that is because this is part of a larger model, then you need to set the origin point in the manufacture settings in Fusion. You can set the origin in either or both places, and it will make centering your work much easier. Especially when you’re trying to fill up a sheet or board with parts, so as not to waste wood.

---

<div class="post-metadata">

**Author:** ![noexit](https://yyz1.discourse-cdn.com/flex031/user_avatar/forums.maslowcnc.com/noexit/32/12460_2.png) [@noexit](https://forums.maslowcnc.com/u/noexit)\
**Post date:** [April 22, 2019, 8:09pm UTC](https://forums.maslowcnc.com/t/inkscape-svg-wont-open-in-makercam/9614/13 "2019-04-22T20:09:41Z")

</div>

Right now it’s only one part, but there will be several once I finish drawing everything. I’m still refining my design on a single part before I draw everything up.

---

<div class="post-metadata">

**Author:** ![dlang](https://yyz1.discourse-cdn.com/flex031/user_avatar/forums.maslowcnc.com/dlang/32/859_2.png) [@dlang](https://forums.maslowcnc.com/u/dlang)\
**Post date:** [April 22, 2019, 8:33pm UTC](https://forums.maslowcnc.com/t/inkscape-svg-wont-open-in-makercam/9614/14 "2019-04-22T20:33:29Z")

</div>

see if there’s a setting for ‘depth first’, if so, that will cut each path  
multiple times down to the final depth. That may be smart enough to not retract  
betweeen each pass

otherwise, it goes over each path once at each depth, retracting to the safe  
height and moving to the next path rather than cutting deeper.

you can set what the safe height is (it’s usually pretty conservative, which  
means moving the Z axis more than strictly needed)

David Lang

---

<div class="post-metadata">

**Author:** ![TheMerryYeoman](https://yyz1.discourse-cdn.com/flex031/user_avatar/forums.maslowcnc.com/themerryyeoman/32/8009_2.png) [@TheMerryYeoman](https://forums.maslowcnc.com/u/TheMerryYeoman)\
**Post date:** [April 23, 2019, 4:47am UTC](https://forums.maslowcnc.com/t/inkscape-svg-wont-open-in-makercam/9614/15 "2019-04-23T04:47:17Z")

</div>

> [@noexit](#):
>
> I can limit how much it retracts, but I’ll have to play with it a bit more to see if I can get rid of it altogether.

Yes. I keep safety height at a minimum. I worded that funny. I’ve just watched so very much up and down when it seems unnecessary. Is there a possibility that someone could create a special kind of optimizer for this specific issue?

---

<div class="post-metadata">

**Author:** ![dlang](https://yyz1.discourse-cdn.com/flex031/user_avatar/forums.maslowcnc.com/dlang/32/859_2.png) [@dlang](https://forums.maslowcnc.com/u/dlang)\
**Post date:** [April 23, 2019, 5:05am UTC](https://forums.maslowcnc.com/t/inkscape-svg-wont-open-in-makercam/9614/16 "2019-04-23T05:05:18Z")

</div>

see the topic [G-Code Optimizers?](https://forums.maslowcnc.com/t/g-code-optimizers/3246)

and from google:  
[https://www.google.com/search?q=gcode+optimizer](https://www.google.com/search?q=gcode+optimizer)

[https://xyzbots.com:4000/gcode-optimizer/](https://xyzbots.com:4000/gcode-optimizer/) and  
[https://cnc-apps.com/en/app/optimizegcode](https://cnc-apps.com/en/app/optimizegcode)  
[http://www.cuteminds.com/en/il-software/freeware-per-pcb/78-gcode-path-optimizer](http://www.cuteminds.com/en/il-software/freeware-per-pcb/78-gcode-path-optimizer)  
[https://hackaday.io/project/4955-g-code-optimization](https://hackaday.io/project/4955-g-code-optimization)

David Lang

---

<div class="post-metadata">

**Author:** ![tinker](https://yyz1.discourse-cdn.com/flex031/user_avatar/forums.maslowcnc.com/tinker/32/9747_2.png) [@tinker](https://forums.maslowcnc.com/u/tinker)\
**Post date:** [April 25, 2019, 8:29pm UTC](https://forums.maslowcnc.com/t/inkscape-svg-wont-open-in-makercam/9614/17 "2019-04-25T20:29:48Z")

</div>

> [@noexit](#):
>
> No matter how I try to position my stock, my part is always in a strange place.

See “Stock point” in the “Setup” tab. Then pick the center top point on the yellow stock box.

> **[Fusion 360 CAM: Introduction & Toolpaths - Fusion 360 Blog](https://www.autodesk.com/products/fusion-360/blog/getting-started-introduction-to-cam-and-toolpaths/)**
>
> This post is a quick Fusion 360 CAM tutorial & introduction, where we will look at how to create your first setup and toolpaths.
