# Inkscape templates

**URL:** <https://forums.maslowcnc.com/t/inkscape-templates/863>\
**Category:** Uncategorized\
**Created:** [October 19, 2017, 9:28pm UTC](https://forums.maslowcnc.com/t/inkscape-templates/863 "2017-10-19T21:28:46Z")\
**Posts on this page:** 1\
**Showing post:** 12

<div class="post-metadata">

**Author:** ![dlang](https://yyz1.discourse-cdn.com/flex031/user_avatar/forums.maslowcnc.com/dlang/32/859_2.png) [@dlang](https://forums.maslowcnc.com/u/dlang)\
**Post date:** [October 24, 2017, 4:17pm UTC](https://forums.maslowcnc.com/t/inkscape-templates/863/12 "2017-10-24T16:17:32Z")

</div>

> [@TheRiflesSpiral](#):
>
> > [@bar](#):
> >
> > OnShape –\> Maslow video
> 
> Is that a 1-step workflow? I’d really like to be able to CAD/CAM in one step and I’m finding F360 to be cumbersome in that regard.

it’s still the same steps, first you create the model, then you create the g-code, then you run the g-code.

there’s a (long) video that shows the CAM and milling steps (on a different machine) steps in onshape that I mention in this topic [Good video showing the CAM workflow in onshape](https://forums.maslowcnc.com/t/good-video-showing-the-cam-workflow-in-onshape/887)

---

_[View the full topic](https://forums.maslowcnc.com/t/inkscape-templates/863)._