# Inside right angles solved **URL:** \ **Category:** Hardware\ **Created:** [February 28, 2018, 6:31pm UTC](https://forums.maslowcnc.com/t/inside-right-angles-solved/2535 "2018-02-28T18:31:40Z")\ **Posts on this page:** 8\ **Page:** 1
**Author:** ![Sharpsburg\_Woodworke](https://yyz1.discourse-cdn.com/flex031/user_avatar/forums.maslowcnc.com/sharpsburg_woodworke/32/3794_2.png) [@Sharpsburg\_Woodworke](https://forums.maslowcnc.com/u/Sharpsburg_Woodworke)\ **Post date:** [February 28, 2018, 6:31pm UTC](https://forums.maslowcnc.com/t/inside-right-angles-solved/2535/1 "2018-02-28T18:31:40Z")
I was thinking about how to solve the inside cuts on the cnc. If you do the dog bone cut, it will allow the wood to lock but you will have a gap. What about taking 1/4 in dowel and notching a 90 degree out on a table saw. Then driving the dowel in place to fill the gap(glue in place as well), and cut off excess. If this could be mass produced, then it could actually be a lucrative business. ![IMG_20180228_132732](https://canada1.discourse-cdn.com/flex031/uploads/maslowcnc/original/2X/e/ed5f424a0246e10e0a97977ee70e15de5d358514.jpg) ![IMG_20180228_132845](https://canada1.discourse-cdn.com/flex031/uploads/maslowcnc/original/2X/b/beeb5825292261b8f6d6277ac1dbd4956626df8f.jpg) ![svg](https://canada1.discourse-cdn.com/flex031/uploads/maslowcnc/original/2X/4/4b32f1a68e294e833ea6a8177f0d5e3a51ccf080.png) Pac man was my inspiration. ---
**Author:** ![Bee](https://yyz1.discourse-cdn.com/flex031/user_avatar/forums.maslowcnc.com/bee/32/2160_2.png) [@Bee](https://forums.maslowcnc.com/u/Bee)\ **Post date:** [February 28, 2018, 7:05pm UTC](https://forums.maslowcnc.com/t/inside-right-angles-solved/2535/2 "2018-02-28T19:05:30Z")
You now owe Midway for their inspiration. Thank you ---
**Author:** ![Gero](https://yyz1.discourse-cdn.com/flex031/user_avatar/forums.maslowcnc.com/gero/32/17487_2.png) [@Gero](https://forums.maslowcnc.com/u/Gero)\ **Post date:** [February 28, 2018, 7:16pm UTC](https://forums.maslowcnc.com/t/inside-right-angles-solved/2535/3 "2018-02-28T19:16:32Z")
I like the idea, I’ll take 20 oak, 20 cherry, 20 birch and 3 mahogany please. ---
**Author:** ![dlang](https://yyz1.discourse-cdn.com/flex031/user_avatar/forums.maslowcnc.com/dlang/32/859_2.png) [@dlang](https://forums.maslowcnc.com/u/dlang)\ **Post date:** [February 28, 2018, 9:38pm UTC](https://forums.maslowcnc.com/t/inside-right-angles-solved/2535/4 "2018-02-28T21:38:25Z")
how much needs to be cut out of the dowel will depend on how far you take the dogbone. If you do a minimal dogbone, the corner of the tab will touch the edge of the cut (which makes the gaps much smaller than if you go to where the center of the bit is at the corner) it would be interesting to see if there was a market for this. ---
**Author:** ![akamcfly](https://yyz1.discourse-cdn.com/flex031/user_avatar/forums.maslowcnc.com/akamcfly/32/2086_2.png) [@akamcfly](https://forums.maslowcnc.com/u/akamcfly)\ **Post date:** [February 28, 2018, 9:45pm UTC](https://forums.maslowcnc.com/t/inside-right-angles-solved/2535/5 "2018-02-28T21:45:37Z")
Why not clip the corners on the tenons and use round dowels? ---
**Author:** ![Sharpsburg\_Woodworke](https://yyz1.discourse-cdn.com/flex031/user_avatar/forums.maslowcnc.com/sharpsburg_woodworke/32/3794_2.png) [@Sharpsburg\_Woodworke](https://forums.maslowcnc.com/u/Sharpsburg_Woodworke)\ **Post date:** [February 28, 2018, 10:13pm UTC](https://forums.maslowcnc.com/t/inside-right-angles-solved/2535/6 "2018-02-28T22:13:11Z")
I’ve never used a cnc and I am waiting for mine on this shipment. I’m not sure how well my ideas will work. But all I have now is just ideas. You guys are the experts and know what will really work. ---
**Author:** ![Dag83](https://yyz1.discourse-cdn.com/flex031/user_avatar/forums.maslowcnc.com/dag83/32/2603_2.png) [@Dag83](https://forums.maslowcnc.com/u/Dag83)\ **Post date:** [March 1, 2018, 5:11am UTC](https://forums.maslowcnc.com/t/inside-right-angles-solved/2535/7 "2018-03-01T05:11:55Z")
> [@Sharpsburg\_Woodworke](#): > > You guys are the experts I think you’re seriously overestimating your collaborators here 😃 But you could just keep the dog bones and look at them as a style choice. You could also make your dog bones lager then usual, so your pacman dowels fit (if you’re gonna paint the work piece that seems like a good option) Also no maslow here yet, some woodworking experience. ---
**Author:** ![akamcfly](https://yyz1.discourse-cdn.com/flex031/user_avatar/forums.maslowcnc.com/akamcfly/32/2086_2.png) [@akamcfly](https://forums.maslowcnc.com/u/akamcfly)\ **Post date:** [March 1, 2018, 10:31am UTC](https://forums.maslowcnc.com/t/inside-right-angles-solved/2535/8 "2018-03-01T10:31:32Z")
> [@Sharpsburg\_Woodworke](#): > > You guys are the experts > [@Dag83](#): > > I think you’re seriously overestimating your collaborators here 😃 This exactly 😃