# Interstitial Firmware Releases

**URL:** <https://forums.maslowcnc.com/t/interstitial-firmware-releases/20215>\
**Category:** Maslow Firmware\
**Created:** [March 15, 2024, 5:19pm UTC](https://forums.maslowcnc.com/t/interstitial-firmware-releases/20215 "2024-03-15T17:19:21Z")\
**Posts on this page:** 1\
**Showing post:** 99

<div class="post-metadata">

**Author:** ![ronlawrence3](https://yyz1.discourse-cdn.com/flex031/user_avatar/forums.maslowcnc.com/ronlawrence3/32/7886_2.png) [@ronlawrence3](https://forums.maslowcnc.com/u/ronlawrence3)\
**Post date:** [April 24, 2024, 2:03pm UTC](https://forums.maslowcnc.com/t/interstitial-firmware-releases/20215/99 "2024-04-24T14:03:08Z")

</div>

Probably spot on. I’ll try again tonight after work with rougher numbers to start (8ft x 8ft) and see how it does by itself. I can maybe try a big calibration too with it up at 8x12… We’ll see how much time I have.

the thread where you gave the numbers is here:[M4: Calibration fail observations, large portrait vertical - #153 by WFD](https://forums.maslowcnc.com/t/m4-calibration-fail-observations-large-portrait-vertical/20473/153)

---

_[View the full topic](https://forums.maslowcnc.com/t/interstitial-firmware-releases/20215)._