# Is there a "Complete individual objects" option in KrabzCAM?

**URL:** <https://forums.maslowcnc.com/t/is-there-a-complete-individual-objects-option-in-krabzcam/23070>\
**Category:** CAD/CAM Software Tips\
**Created:** [December 31, 2024, 6:24am UTC](https://forums.maslowcnc.com/t/is-there-a-complete-individual-objects-option-in-krabzcam/23070 "2024-12-31T06:24:35Z")\
**Posts on this page:** 3\
**Page:** 1

<div class="post-metadata">

**Author:** ![protiva](https://yyz1.discourse-cdn.com/flex031/user_avatar/forums.maslowcnc.com/protiva/32/25685_2.png) [@protiva](https://forums.maslowcnc.com/u/protiva)\
**Post date:** [December 31, 2024, 6:24am UTC](https://forums.maslowcnc.com/t/is-there-a-complete-individual-objects-option-in-krabzcam/23070/1 "2024-12-31T06:24:35Z")

</div>

By default KrabCAM cuts all parts on layer at a time, is there a way to cut a part all the way before moving onto the next part? Similar to “Complete individual parts” option in PrusaSlicer, but I don’t know what it would be called in CAM software if it’s a thing.

I’m interested in this because I’m trying to cut slots across a 4x8 sheet of plywood but I’m getting inaccuracies between each pass (3 passed on 3/4" maple, 1/4" bit) so I was thinking If I could complete each slot one by one, the slot would be more precise.

 ![4x8 slots](https://canada1.discourse-cdn.com/flex031/uploads/maslowcnc/original/3X/b/6/b6c8a2bec7e814d42724ca2b7a28129a979ef3dd.jpeg)

---

<div class="post-metadata">

**Author:** ![mkrabset](https://yyz1.discourse-cdn.com/flex031/user_avatar/forums.maslowcnc.com/mkrabset/32/16092_2.png) [@mkrabset](https://forums.maslowcnc.com/u/mkrabset)\
**Post date:** [December 31, 2024, 2:19pm UTC](https://forums.maslowcnc.com/t/is-there-a-complete-individual-objects-option-in-krabzcam/23070/2 "2024-12-31T14:19:06Z")

</div>

I believe you will get your desired result if you change parameter “Order” from “LayerFirst” to “DepthFirst”.

---

<div class="post-metadata">

**Author:** ![protiva](https://yyz1.discourse-cdn.com/flex031/user_avatar/forums.maslowcnc.com/protiva/32/25685_2.png) [@protiva](https://forums.maslowcnc.com/u/protiva)\
**Post date:** [December 31, 2024, 4:54pm UTC](https://forums.maslowcnc.com/t/is-there-a-complete-individual-objects-option-in-krabzcam/23070/3 "2024-12-31T16:54:01Z")

</div>

That’s exactly what I was looking for! Now I know what it’s called. Thank you!