# Is this type of loose belt play to be expected?

**URL:** <https://forums.maslowcnc.com/t/is-this-type-of-loose-belt-play-to-be-expected/20860>\
**Category:** Troubleshooting\
**Created:** [April 29, 2024, 3:17am UTC](https://forums.maslowcnc.com/t/is-this-type-of-loose-belt-play-to-be-expected/20860 "2024-04-29T03:17:34Z")\
**Posts on this page:** 1\
**Showing post:** 4

<div class="post-metadata">

**Author:** ![Carson\_Barry](https://yyz1.discourse-cdn.com/flex031/user_avatar/forums.maslowcnc.com/carson_barry/32/23367_2.png) [@Carson\_Barry](https://forums.maslowcnc.com/u/Carson_Barry)\
**Post date:** [April 29, 2024, 3:34am UTC](https://forums.maslowcnc.com/t/is-this-type-of-loose-belt-play-to-be-expected/20860/4 "2024-04-29T03:34:32Z")

</div>

> [@Interstitial Firmware Releases](https://forums.maslowcnc.com/t/interstitial-firmware-releases/20215/148):
>
> Yup, that is exactly correct! I’ve been seeing this too. Looking into that is coming up on my todo list Glad to hear it grinning

I’m on 0.70.2, so updating might not do anything for you, but here’s the thread with the newest release. It’s more up to date than the github.

I’m going to run another calibration and see if that helps, since it should become more accurate after that, but I’m going to do a test cut first to see how much of a difference it makes for this on mine.

---

_[View the full topic](https://forums.maslowcnc.com/t/is-this-type-of-loose-belt-play-to-be-expected/20860)._