# Is Webcontrol-0.94-rpi-singledirectory.tar.gz in github corrupted? **URL:** \ **Category:** Troubleshooting\ **Created:** [April 23, 2025, 6:10pm UTC](https://forums.maslowcnc.com/t/is-webcontrol-0-94-rpi-singledirectory-tar-gz-in-github-corrupted/23874 "2025-04-23T18:10:04Z")\ **Posts on this page:** 5\ **Page:** 1
**Author:** ![ACME](https://avatars.discourse-cdn.com/v4/letter/a/b487fb/32.png) [@ACME](https://forums.maslowcnc.com/u/ACME)\ **Post date:** [April 23, 2025, 6:10pm UTC](https://forums.maslowcnc.com/t/is-webcontrol-0-94-rpi-singledirectory-tar-gz-in-github-corrupted/23874/1 "2025-04-23T18:10:04Z")
This will be my 4th post in the past week or two regarding the fact I can not get webcontrol to execute after loading it on my Rpi 4 B. I have tried the 64bit Rpi OS and the 32 bit OS and I have used 3 different brand micro SD cards. It seems no matter what I do, I get to the point where I type ./webcontrol and it gives an error message. I would be curious if someone with an extra Rpi could try to load it and see if it works or not? I’m using the same instructions I used to get it up and running 2 years ago. Message is typically something like “can’t find required file”. Rather than retype everything here, you can look at another topic I opened where David Lang attempted to help me. There I have screenshots of the issue. ---
**Author:** ![ACME](https://avatars.discourse-cdn.com/v4/letter/a/b487fb/32.png) [@ACME](https://forums.maslowcnc.com/u/ACME)\ **Post date:** [April 25, 2025, 4:22pm UTC](https://forums.maslowcnc.com/t/is-webcontrol-0-94-rpi-singledirectory-tar-gz-in-github-corrupted/23874/2 "2025-04-25T16:22:45Z")
I’ll just use windows on my laptop to operate the router as I can connect that way. I’m guessing the new version of Maslow must operate on a different system and the 3 axis units are no longer supported? ---
**Author:** ![bar](https://yyz1.discourse-cdn.com/flex031/user_avatar/forums.maslowcnc.com/bar/32/10_2.png) [@bar](https://forums.maslowcnc.com/u/bar)\ **Post date:** [April 25, 2025, 4:59pm UTC](https://forums.maslowcnc.com/t/is-webcontrol-0-94-rpi-singledirectory-tar-gz-in-github-corrupted/23874/3 "2025-04-25T16:59:30Z")
Yeah, we (Maslow) stopped making those machines in 2018 so things have come quite a long way since then. Webcontrol was actually a community created project. It’s phenomenal, but I think that most folks have moved on from working on it at this point. ---
**Author:** ![ACME](https://avatars.discourse-cdn.com/v4/letter/a/b487fb/32.png) [@ACME](https://forums.maslowcnc.com/u/ACME)\ **Post date:** [April 25, 2025, 10:34pm UTC](https://forums.maslowcnc.com/t/is-webcontrol-0-94-rpi-singledirectory-tar-gz-in-github-corrupted/23874/4 "2025-04-25T22:34:50Z")
I realized that after all I heard was crickets LOL. I just signed up for the update email to get a 4.1. I’m super excited about this now that I have gone through the pains of remorse over my 3 axis unit. Any insider information on when they might be available again? ---
**Author:** ![TimS](https://yyz1.discourse-cdn.com/flex031/user_avatar/forums.maslowcnc.com/tims/32/17329_2.png) [@TimS](https://forums.maslowcnc.com/u/TimS)\ **Post date:** [April 26, 2025, 5:07am UTC](https://forums.maslowcnc.com/t/is-webcontrol-0-94-rpi-singledirectory-tar-gz-in-github-corrupted/23874/5 "2025-04-26T05:07:32Z")
I’m still using webcontrol but not on raspi. Using my Linux laptop from 2010. Works great