# Issues with Right motor control

**URL:** <https://forums.maslowcnc.com/t/issues-with-right-motor-control/3241>\
**Category:** Troubleshooting\
**Created:** [April 10, 2018, 1:25am UTC](https://forums.maslowcnc.com/t/issues-with-right-motor-control/3241 "2018-04-10T01:25:34Z")\
**Posts on this page:** 1\
**Showing post:** 5

<div class="post-metadata">

**Author:** ![Layne\_Mims](https://yyz1.discourse-cdn.com/flex031/user_avatar/forums.maslowcnc.com/layne_mims/32/12989_2.png) [@Layne\_Mims](https://forums.maslowcnc.com/u/Layne_Mims)\
**Post date:** [April 10, 2018, 3:15am UTC](https://forums.maslowcnc.com/t/issues-with-right-motor-control/3241/5 "2018-04-10T03:15:31Z")

</div>

I’ve not connected the z axis yet. I ran this one time with the sled connected, and then disconnected it and just let both chains connected to a weight. just to keep it all moving, with a load. the heat didn’t seem too much, but the difference in heat bothered me.

---

_[View the full topic](https://forums.maslowcnc.com/t/issues-with-right-motor-control/3241)._