# Loose belts during calibration

**URL:** <https://forums.maslowcnc.com/t/loose-belts-during-calibration/22248>\
**Category:** Uncategorized\
**Tags:** calibration\
**Created:** [September 6, 2024, 1:14pm UTC](https://forums.maslowcnc.com/t/loose-belts-during-calibration/22248 "2024-09-06T13:14:20Z")\
**Posts on this page:** 1\
**Showing post:** 40

<div class="post-metadata">

**Author:** ![md8n](https://yyz1.discourse-cdn.com/flex031/user_avatar/forums.maslowcnc.com/md8n/32/28197_2.png) [@md8n](https://forums.maslowcnc.com/u/md8n)\
**Post date:** [October 1, 2024, 12:06am UTC](https://forums.maslowcnc.com/t/loose-belts-during-calibration/22248/40 "2024-10-01T00:06:26Z")

</div>

> [@md8n](#):
>
> Current arrangement is (highest to lowest in the stack of arms) TL —\> BR → TR —\> BL, but this results in the greatest relative height difference between TL → BL

Projecting the various arm heights out can give this visualisation

 ![image](https://canada1.discourse-cdn.com/flex031/uploads/maslowcnc/original/3X/a/6/a6348caf472847726d485963b629971bc2a7923f.png)

The alternative that I suggested (BL -\>TL —\> BR → TR) looks like this when performing the same kind of visualisation

 ![image](https://canada1.discourse-cdn.com/flex031/uploads/maslowcnc/original/3X/9/1/9184c128410c414af2a51b4478214b80270fe418.png)

---

_[View the full topic](https://forums.maslowcnc.com/t/loose-belts-during-calibration/22248)._