# M2 z-axis upgrade

**URL:** <https://forums.maslowcnc.com/t/m2-z-axis-upgrade/19386>\
**Category:** MakerMade\
**Created:** [September 21, 2023, 6:48pm UTC](https://forums.maslowcnc.com/t/m2-z-axis-upgrade/19386 "2023-09-21T18:48:40Z")\
**Posts on this page:** 3\
**Page:** 1

<div class="post-metadata">

**Author:** ![dontbe](https://yyz1.discourse-cdn.com/flex031/user_avatar/forums.maslowcnc.com/dontbe/32/20867_2.png) [@dontbe](https://forums.maslowcnc.com/u/dontbe)\
**Post date:** [September 21, 2023, 6:48pm UTC](https://forums.maslowcnc.com/t/m2-z-axis-upgrade/19386/1 "2023-09-21T18:48:40Z")

</div>

INstalled Zaxis upgrad to my maslow, but now The z is inverted ,and it travels about .4inch when I ask it to travel .1inch.

I use the webcontrol software to control it through a browswer page.  
Can anyone steer me to how Im supposed to calibrate this with webcontrol?  
THanks!  
regards, Ed

---

<div class="post-metadata">

**Author:** ![dlang](https://yyz1.discourse-cdn.com/flex031/user_avatar/forums.maslowcnc.com/dlang/32/859_2.png) [@dlang](https://forums.maslowcnc.com/u/dlang)\
**Post date:** [September 21, 2023, 7:12pm UTC](https://forums.maslowcnc.com/t/m2-z-axis-upgrade/19386/2 "2023-09-21T19:12:55Z")

</div>

change the z axis pitch in the settings to negative will reverse the direction

David Lang

---

<div class="post-metadata">

**Author:** ![dontbe](https://yyz1.discourse-cdn.com/flex031/user_avatar/forums.maslowcnc.com/dontbe/32/20867_2.png) [@dontbe](https://forums.maslowcnc.com/u/dontbe)\
**Post date:** [September 21, 2023, 8:22pm UTC](https://forums.maslowcnc.com/t/m2-z-axis-upgrade/19386/3 "2023-09-21T20:22:38Z")

</div>

Welp, not sure how I messed that! But that fixed it, and changing the pitch to 16 recalibrated the distance! I think I was stuck on setting/advanced settings for some reason… uugh. but,  
Thanks David!!
