# M4 Assembly instruction - comments

**URL:** <https://forums.maslowcnc.com/t/m4-assembly-instruction-comments/21431>\
**Category:** Site Feedback\
**Created:** [June 8, 2024, 12:29pm UTC](https://forums.maslowcnc.com/t/m4-assembly-instruction-comments/21431 "2024-06-08T12:29:24Z")\
**Posts on this page:** 5\
**Page:** 1

<div class="post-metadata">

**Author:** ![Jonathan\_Dion](https://yyz1.discourse-cdn.com/flex031/user_avatar/forums.maslowcnc.com/jonathan_dion/32/25062_2.png) [@Jonathan\_Dion](https://forums.maslowcnc.com/u/Jonathan_Dion)\
**Post date:** [June 8, 2024, 12:29pm UTC](https://forums.maslowcnc.com/t/m4-assembly-instruction-comments/21431/1 "2024-06-08T12:29:24Z")

</div>

Hi ! I’m still building my M4 . Just finishing assembling the arms.

[Assembling the arms — Maslow (maslowcnc.com)](https://www.maslowcnc.com/assembling-the-arms)

In the step "press halves together( that’s seems to be the most tricky )…

In the current instructions, the assembly process seems easier when the belts are placed on the opposite side of the arms. Everything appears to be functioning well, but I would like to confirm if this is an improvement to the existing guide or if I have assembled it incorrectly.

My assembly :

 ![image](https://canada1.discourse-cdn.com/flex031/uploads/maslowcnc/original/3X/8/9/89b761a6b773ba1f4685899dccd39c6f057527eb.jpeg)

Then, juste place the motor mounted parts on the top, snap and bolt 🙂

Thanks. Jonathan

---

<div class="post-metadata">

**Author:** ![Carson\_Barry](https://yyz1.discourse-cdn.com/flex031/user_avatar/forums.maslowcnc.com/carson_barry/32/23367_2.png) [@Carson\_Barry](https://forums.maslowcnc.com/u/Carson_Barry)\
**Post date:** [June 8, 2024, 1:01pm UTC](https://forums.maslowcnc.com/t/m4-assembly-instruction-comments/21431/2 "2024-06-08T13:01:12Z")

</div>

> [@Maslow 4 assembly guide feedback](https://forums.maslowcnc.com/t/maslow-4-assembly-guide-feedback/19952/178):
>
> Thanks-I may add dry lube then since they are not already oiled–shouldnt be dust magnet with dry lube

Main assembly feedback thread.

---

<div class="post-metadata">

**Author:** ![Jonathan\_Dion](https://yyz1.discourse-cdn.com/flex031/user_avatar/forums.maslowcnc.com/jonathan_dion/32/25062_2.png) [@Jonathan\_Dion](https://forums.maslowcnc.com/u/Jonathan_Dion)\
**Post date:** [June 8, 2024, 1:15pm UTC](https://forums.maslowcnc.com/t/m4-assembly-instruction-comments/21431/3 "2024-06-08T13:15:33Z")

</div>

how can i move this ?

---

<div class="post-metadata">

**Author:** ![Carson\_Barry](https://yyz1.discourse-cdn.com/flex031/user_avatar/forums.maslowcnc.com/carson_barry/32/23367_2.png) [@Carson\_Barry](https://forums.maslowcnc.com/u/Carson_Barry)\
**Post date:** [June 8, 2024, 4:23pm UTC](https://forums.maslowcnc.com/t/m4-assembly-instruction-comments/21431/4 "2024-06-08T16:23:12Z")

</div>

Copy paste

Wasn’t calling you out, just signposting

---

<div class="post-metadata">

**Author:** ![Dano](https://avatars.discourse-cdn.com/v4/letter/d/e0b2c6/32.png) [@Dano](https://forums.maslowcnc.com/u/Dano)\
**Post date:** [July 13, 2024, 6:57pm UTC](https://forums.maslowcnc.com/t/m4-assembly-instruction-comments/21431/5 "2024-07-13T18:57:35Z")

</div>

Jonathan, I am in process of reassembly and came to same conclusion. I was just about to post similar when I came across yours.
