# M4 Calibration Questions

**URL:** <https://forums.maslowcnc.com/t/m4-calibration-questions/20154>\
**Category:** Uncategorized\
**Created:** [March 12, 2024, 4:34pm UTC](https://forums.maslowcnc.com/t/m4-calibration-questions/20154 "2024-03-12T16:34:34Z")\
**Posts on this page:** 1\
**Showing post:** 27

<div class="post-metadata">

**Author:** ![bar](https://yyz1.discourse-cdn.com/flex031/user_avatar/forums.maslowcnc.com/bar/32/10_2.png) [@bar](https://forums.maslowcnc.com/u/bar)\
**Post date:** [March 13, 2024, 1:55am UTC](https://forums.maslowcnc.com/t/m4-calibration-questions/20154/27 "2024-03-13T01:55:41Z")

</div>

I’ve found a couple issues as I’ve been investigating this, but I don’t think that any of them are the issue that you are seeing. I am going to keep digging into this until I can figure out what is going on.

In the mean time the good news is that those numbers are the raw data needed to compute the calibration so I was able to compute it for you here if you want to skip figuring it out and jump to the answer.

Fitness: 0.6394170814561981

TLX: 2.8261539845787076,  
TLY 2436.220662692549),  
TRX: 3661.4228035375863,  
TRY: 2431.6915843703505  
BRX: 3657.194987003678

---

_[View the full topic](https://forums.maslowcnc.com/t/m4-calibration-questions/20154)._