# M4 'Hourglass' Frame

**URL:** <https://forums.maslowcnc.com/t/m4-hourglass-frame/20237>\
**Category:** Hardware\
**Created:** [March 17, 2024, 12:38am UTC](https://forums.maslowcnc.com/t/m4-hourglass-frame/20237 "2024-03-17T00:38:40Z")\
**Posts on this page:** 1\
**Showing post:** 12

<div class="post-metadata">

**Author:** ![CPL](https://yyz1.discourse-cdn.com/flex031/user_avatar/forums.maslowcnc.com/cpl/32/23216_2.png) [@CPL](https://forums.maslowcnc.com/u/CPL)\
**Post date:** [April 27, 2024, 10:25am UTC](https://forums.maslowcnc.com/t/m4-hourglass-frame/20237/12 "2024-04-27T10:25:32Z")

</div>

A couple of pictures of the hourglass frame in use- successful calibration with 0.70.2

 ![image](https://canada1.discourse-cdn.com/flex031/uploads/maslowcnc/original/3X/2/2/22c0811b0abef9defad3839ff9707ea9a2a1ddf8.jpeg)

 ![image](https://canada1.discourse-cdn.com/flex031/uploads/maslowcnc/original/3X/2/b/2b56562006ae8fea704c773b4dad1b7e457625d8.jpeg)

---

_[View the full topic](https://forums.maslowcnc.com/t/m4-hourglass-frame/20237)._