# M4 Router Be Gone (installed the spindle)

**URL:** <https://forums.maslowcnc.com/t/m4-router-be-gone-installed-the-spindle/21389>\
**Category:** Sled\
**Tags:** router\
**Created:** [June 6, 2024, 2:12am UTC](https://forums.maslowcnc.com/t/m4-router-be-gone-installed-the-spindle/21389 "2024-06-06T02:12:59Z")\
**Posts on this page:** 1\
**Showing post:** 19

<div class="post-metadata">

**Author:** ![md8n](https://yyz1.discourse-cdn.com/flex031/user_avatar/forums.maslowcnc.com/md8n/32/28197_2.png) [@md8n](https://forums.maslowcnc.com/u/md8n)\
**Post date:** [June 10, 2024, 1:42am UTC](https://forums.maslowcnc.com/t/m4-router-be-gone-installed-the-spindle/21389/19 "2024-06-10T01:42:40Z")

</div>

As per this post [3D Print: New Reinforced Corner Mounts - Hardware - Maslow CNC Forums](https://forums.maslowcnc.com/t/3d-print-new-reinforced-corner-mounts/21429/7)

I’ve printed and installed these new anchor point mounts, with a significant improvement in fitness, from 0.489 to 0.55.

I reckon that’s there’s probably another \>2mm total flex (mostly across the width of the frame) for me to deal with. But for now, I’m good with just passing calibration on my modified frame.

---

_[View the full topic](https://forums.maslowcnc.com/t/m4-router-be-gone-installed-the-spindle/21389)._