# M4 Router Be Gone (installed the spindle)

**URL:** <https://forums.maslowcnc.com/t/m4-router-be-gone-installed-the-spindle/21389>\
**Category:** Sled\
**Tags:** router\
**Created:** [June 6, 2024, 2:12am UTC](https://forums.maslowcnc.com/t/m4-router-be-gone-installed-the-spindle/21389 "2024-06-06T02:12:59Z")\
**Posts on this page:** 1\
**Showing post:** 45

<div class="post-metadata">

**Author:** ![md8n](https://yyz1.discourse-cdn.com/flex031/user_avatar/forums.maslowcnc.com/md8n/32/28197_2.png) [@md8n](https://forums.maslowcnc.com/u/md8n)\
**Post date:** [July 9, 2024, 8:23am UTC](https://forums.maslowcnc.com/t/m4-router-be-gone-installed-the-spindle/21389/45 "2024-07-09T08:23:56Z")

</div>

Have a look at this thread [M4 Router Mounter Be-Gone (use any router with a side entry cord)](https://forums.maslowcnc.com/t/m4-router-mounter-be-gone-use-any-router-with-a-side-entry-cord/21202)

Please do scroll through it, because there’s better versions of the supports further down. But you get the context from reading the whole thing

And of course the other files are further back up in this thread

---

_[View the full topic](https://forums.maslowcnc.com/t/m4-router-be-gone-installed-the-spindle/21389)._