# Making a Wooden Clock
**URL:** https://forums.maslowcnc.com/t/making-a-wooden-clock/11989
**Category:** Projects
**Created:** [December 29, 2019, 4:29am UTC](https://forums.maslowcnc.com/t/making-a-wooden-clock/11989 "2019-12-29T04:29:12Z")
**Posts on this page:** 5
**Page:** 1
### Author:  [@Silverbug](https://forums.maslowcnc.com/u/Silverbug)
#### Post date: [December 29, 2019, 4:29am UTC](https://forums.maslowcnc.com/t/making-a-wooden-clock/11989/1 "2019-12-29T04:29:12Z")
So I’ve decided to challenge myself a bit and try and make a wooden clock. I’ll document progress in this thread as I go.
Here’s the link to the plans if anyone is interested [http://www.derekhugger.com/zybach.html](http://www.derekhugger.com/zybach.html)
(also check out some of his other models, absolutely amazing stuff)
I have had to convert the the plans all to metric to accomodate replacing some of the hardware with local metric parts. This has taken a bit more time than I anticipated, as some parts need to be tight fitting and others loose.
Just finished the CAM of the first set of parts ready to start cutting…
Will update when I have more 🙂
---
### Author:  [@bryton](https://forums.maslowcnc.com/u/bryton)
#### Post date: [January 10, 2020, 3:58am UTC](https://forums.maslowcnc.com/t/making-a-wooden-clock/11989/2 "2020-01-10T03:58:23Z")
any updates? seems like a really cool project. I’ve always built clocks like these by hand, it would be interesting to see how it turns out on the maslow
---
### Author:  [@Silverbug](https://forums.maslowcnc.com/u/Silverbug)
#### Post date: [January 11, 2020, 6:47am UTC](https://forums.maslowcnc.com/t/making-a-wooden-clock/11989/3 "2020-01-11T06:47:31Z")
Not yet, too many projects on the go. Although the wife wants some things cut tomorrow so I might slide my stuff in at the same time.
---
### Author:  [@Silverbug](https://forums.maslowcnc.com/u/Silverbug)
#### Post date: [January 15, 2020, 7:38am UTC](https://forums.maslowcnc.com/t/making-a-wooden-clock/11989/4 "2020-01-15T07:38:10Z")
Well got the wife’s project done and all ready for her to start painting. Took a bit longer than anticipated as I lost one of the grub screws for the z axis coupler 😭
Not I can get started on the clock this weekend hopefully
---
### Author:  [@Silverbug](https://forums.maslowcnc.com/u/Silverbug)
#### Post date: [April 19, 2020, 10:49pm UTC](https://forums.maslowcnc.com/t/making-a-wooden-clock/11989/5 "2020-04-19T22:49:12Z")
Haven’t been able to get the plywood I need for the clock cause of the Covid lockdown here, but we did manage to paint the nutcracker.
