# Maslow #29 BuildLog

**URL:** <https://forums.maslowcnc.com/t/maslow-29-buildlog/20077>\
**Category:** Projects\
**Created:** [March 8, 2024, 1:50pm UTC](https://forums.maslowcnc.com/t/maslow-29-buildlog/20077 "2024-03-08T13:50:43Z")\
**Posts on this page:** 1\
**Showing post:** 184

<div class="post-metadata">

**Author:** ![bar](https://yyz1.discourse-cdn.com/flex031/user_avatar/forums.maslowcnc.com/bar/32/10_2.png) [@bar](https://forums.maslowcnc.com/u/bar)\
**Post date:** [April 23, 2024, 2:02am UTC](https://forums.maslowcnc.com/t/maslow-29-buildlog/20077/184 "2024-04-23T02:02:10Z")

</div>

When you have a chance I think that there are two things worth trying.

The first is to give the latest calibration process a try.

> [@Interstitial Firmware Releases](https://forums.maslowcnc.com/t/interstitial-firmware-releases/20215/89):
>
> 0.69.2

Note that successive runs now improve on each-other so it could be worth running it a second time even if the first one doesn’t go right.

Second @WFD created a fantastic spreadsheet which can do the calibration math using the data from a calibration run which seems to give results in cases where my math is breaking down. That could work if my math doesn’t

---

_[View the full topic](https://forums.maslowcnc.com/t/maslow-29-buildlog/20077)._