# Maslow #29 BuildLog

**URL:** <https://forums.maslowcnc.com/t/maslow-29-buildlog/20077>\
**Category:** Projects\
**Created:** [March 8, 2024, 1:50pm UTC](https://forums.maslowcnc.com/t/maslow-29-buildlog/20077 "2024-03-08T13:50:43Z")\
**Posts on this page:** 1\
**Showing post:** 92

<div class="post-metadata">

**Author:** ![bar](https://yyz1.discourse-cdn.com/flex031/user_avatar/forums.maslowcnc.com/bar/32/10_2.png) [@bar](https://forums.maslowcnc.com/u/bar)\
**Post date:** [March 15, 2024, 10:33pm UTC](https://forums.maslowcnc.com/t/maslow-29-buildlog/20077/92 "2024-03-15T22:33:35Z")

</div>

Let’s try this version:

> [@Interstitial Firmware Releases](https://forums.maslowcnc.com/t/interstitial-firmware-releases/20215/5):
>
> Here is 0.64.3 which adds configuration options to the calibration process. Maslow\_calibration\_offset\_X: 500 Maslow\_calibration\_offset\_Y: 500 Maslow\_calibration\_size\_X: 11 Maslow\_calibration\_size\_Y: 9 You can now set the offset for the calibration grid corners in both the X and Y directions (on a long narrow frame having them be the same doesn’t make sense) and also set the number of points in the calibration pattern. This is particularly useful for testing when you don’t want to wait fo…

It will let us configure the number of calibration points so we can do a smaller number to get results faster

---

_[View the full topic](https://forums.maslowcnc.com/t/maslow-29-buildlog/20077)._