# Maslow 4 assembly guide feedback

**URL:** https://forums.maslowcnc.com/t/maslow-4-assembly-guide-feedback/19952
**Category:** No Judgement
**Created:** [February 21, 2024, 9:26pm UTC](https://forums.maslowcnc.com/t/maslow-4-assembly-guide-feedback/19952 "2024-02-21T21:26:08Z")
**Posts on this page:** 1
**Showing post:** 72

<div class="post-metadata">

### Author: ![bar](https://yyz1.discourse-cdn.com/flex031/user_avatar/forums.maslowcnc.com/bar/32/10_2.png) [@bar](https://forums.maslowcnc.com/u/bar)
#### Post date: [April 1, 2024, 2:27am UTC](https://forums.maslowcnc.com/t/maslow-4-assembly-guide-feedback/19952/72 "2024-04-01T02:27:29Z")

</div>

> [@geertdoornbos](#):
>
> The linear support is actually still just too short.

I’ve noticied this too. I’ve checked the CAD models and measured everything and I’m not sure where that extra distance is coming from. I might shorten the linear rods by 0.75mm in the future, but I want to understand where that difference is coming from rather than just changing things without an explanation.

---

_[View the full topic](https://forums.maslowcnc.com/t/maslow-4-assembly-guide-feedback/19952)._