# Maslow 4 Heatsinks

**URL:** <https://forums.maslowcnc.com/t/maslow-4-heatsinks/20723>\
**Category:** No Judgement\
**Created:** [April 18, 2024, 11:43pm UTC](https://forums.maslowcnc.com/t/maslow-4-heatsinks/20723 "2024-04-18T23:43:14Z")\
**Posts on this page:** 4\
**Page:** 1

<div class="post-metadata">

**Author:** ![curiouswoodworkings](https://avatars.discourse-cdn.com/v4/letter/c/9dc877/32.png) [@curiouswoodworkings](https://forums.maslowcnc.com/u/curiouswoodworkings)\
**Post date:** [April 18, 2024, 11:43pm UTC](https://forums.maslowcnc.com/t/maslow-4-heatsinks/20723/1 "2024-04-18T23:43:14Z")

</div>

Hi - I see instructions for the location(s) of the Heatsink installation - but curious if I can see a photo of the PCB with the heatsinks installed. Is there a proper orientation to follow?

---

<div class="post-metadata">

**Author:** ![CPL](https://yyz1.discourse-cdn.com/flex031/user_avatar/forums.maslowcnc.com/cpl/32/23216_2.png) [@CPL](https://forums.maslowcnc.com/u/CPL)\
**Post date:** [April 18, 2024, 11:55pm UTC](https://forums.maslowcnc.com/t/maslow-4-heatsinks/20723/2 "2024-04-18T23:55:37Z")

</div>

The fins go up! 🤣 (Sorry, I couldn’t resist)

---

<div class="post-metadata">

**Author:** ![CPL](https://yyz1.discourse-cdn.com/flex031/user_avatar/forums.maslowcnc.com/cpl/32/23216_2.png) [@CPL](https://forums.maslowcnc.com/u/CPL)\
**Post date:** [April 19, 2024, 12:03am UTC](https://forums.maslowcnc.com/t/maslow-4-heatsinks/20723/3 "2024-04-19T00:03:23Z")

</div>

Seriously, since the fan is directly above the board, I don’t see how it would matter. which direction they face,

---

<div class="post-metadata">

**Author:** ![curiouswoodworkings](https://avatars.discourse-cdn.com/v4/letter/c/9dc877/32.png) [@curiouswoodworkings](https://forums.maslowcnc.com/u/curiouswoodworkings)\
**Post date:** [April 19, 2024, 12:07am UTC](https://forums.maslowcnc.com/t/maslow-4-heatsinks/20723/4 "2024-04-19T00:07:12Z")

</div>

🤣  
OK, OK… I’ll give you that one. Appreciate the input.