# Maslow 4 - The next generation of Maslow

**URL:** <https://forums.maslowcnc.com/t/maslow-4-the-next-generation-of-maslow/18773>\
**Category:** Technical Details\
**Created:** [March 19, 2023, 5:56pm UTC](https://forums.maslowcnc.com/t/maslow-4-the-next-generation-of-maslow/18773 "2023-03-19T17:56:20Z")\
**Posts on this page:** 20\
**Page:** 14

<div class="post-metadata">

**Author:** ![md8n](https://yyz1.discourse-cdn.com/flex031/user_avatar/forums.maslowcnc.com/md8n/32/28197_2.png) [@md8n](https://forums.maslowcnc.com/u/md8n)\
**Post date:** [August 3, 2023, 10:33pm UTC](https://forums.maslowcnc.com/t/maslow-4-the-next-generation-of-maslow/18773/261 "2023-08-03T22:33:33Z")

</div>

> [@dlang](#):
>
> The code is available via github already.

Can you post the URL to that please

---

<div class="post-metadata">

**Author:** ![dlang](https://yyz1.discourse-cdn.com/flex031/user_avatar/forums.maslowcnc.com/dlang/32/859_2.png) [@dlang](https://forums.maslowcnc.com/u/dlang)\
**Post date:** [August 3, 2023, 11:33pm UTC](https://forums.maslowcnc.com/t/maslow-4-the-next-generation-of-maslow/18773/262 "2023-08-03T23:33:05Z")

</div>

> **[GitHub - BarbourSmith/FluidNC: The next generation of motion control firmware](https://github.com/BarbourSmith/FluidNC)**
>
> The next generation of motion control firmware. Contribute to BarbourSmith/FluidNC development by creating an account on GitHub.

David Lang

---

<div class="post-metadata">

**Author:** ![dlang](https://yyz1.discourse-cdn.com/flex031/user_avatar/forums.maslowcnc.com/dlang/32/859_2.png) [@dlang](https://forums.maslowcnc.com/u/dlang)\
**Post date:** [August 3, 2023, 11:36pm UTC](https://forums.maslowcnc.com/t/maslow-4-the-next-generation-of-maslow/18773/263 "2023-08-03T23:36:38Z")

</div>

@bar, does this version have the ability to turn the motor on/off?

I’m wanting to build a plasma cutter version of this and instead of the Z moving, it will be a matter of turning the torch on and off.

---

<div class="post-metadata">

**Author:** ![Charlotte\_NC](https://avatars.discourse-cdn.com/v4/letter/c/50afbb/32.png) [@Charlotte\_NC](https://forums.maslowcnc.com/u/Charlotte_NC)\
**Post date:** [August 3, 2023, 11:41pm UTC](https://forums.maslowcnc.com/t/maslow-4-the-next-generation-of-maslow/18773/264 "2023-08-03T23:41:27Z")

</div>

that sounds awesome. I guess you will use a metal sled filled with water to cool it down?

---

<div class="post-metadata">

**Author:** ![dlang](https://yyz1.discourse-cdn.com/flex031/user_avatar/forums.maslowcnc.com/dlang/32/859_2.png) [@dlang](https://forums.maslowcnc.com/u/dlang)\
**Post date:** [August 3, 2023, 11:42pm UTC](https://forums.maslowcnc.com/t/maslow-4-the-next-generation-of-maslow/18773/265 "2023-08-03T23:42:34Z")

</div>

one thing we will want people to help with is getting the maslow specific  
changes upstream into fluidNC

David Lang

---

<div class="post-metadata">

**Author:** ![dlang](https://yyz1.discourse-cdn.com/flex031/user_avatar/forums.maslowcnc.com/dlang/32/859_2.png) [@dlang](https://forums.maslowcnc.com/u/dlang)\
**Post date:** [August 3, 2023, 11:56pm UTC](https://forums.maslowcnc.com/t/maslow-4-the-next-generation-of-maslow/18773/266 "2023-08-03T23:56:51Z")

</div>

probably a metal sled, but no water on the sled. Proper plasma cutting (hard to  
do without CMC doesn’t generate that much heat in the material you are cutting.  
you could probably get away with a thin layer of metal over plastic, but I’d  
probably do a simple metal sled.

David Lang

---

<div class="post-metadata">

**Author:** ![bar](https://yyz1.discourse-cdn.com/flex031/user_avatar/forums.maslowcnc.com/bar/32/10_2.png) [@bar](https://forums.maslowcnc.com/u/bar)\
**Post date:** [August 4, 2023, 12:13am UTC](https://forums.maslowcnc.com/t/maslow-4-the-next-generation-of-maslow/18773/267 "2023-08-04T00:13:24Z")

</div>

> [@dlang](#):
>
> @bar, does this version have the ability to turn the motor on/off?
> 
> I’m wanting to build a plasma cutter version of this and instead of the Z moving, it will be a matter of turning the torch on and off.

Yes in that fluidNC has that ability built in and there are exposed IO pins for controlling anything. I haven’t personally done it, but I believe it shouldn’t be an issue at all. I’m not even sure you’d need to change the firmware, fluidNC has a nice config file that lets you control most things about the machine without needing to edit the code itself.

---

<div class="post-metadata">

**Author:** ![md8n](https://yyz1.discourse-cdn.com/flex031/user_avatar/forums.maslowcnc.com/md8n/32/28197_2.png) [@md8n](https://forums.maslowcnc.com/u/md8n)\
**Post date:** [August 4, 2023, 12:22am UTC](https://forums.maslowcnc.com/t/maslow-4-the-next-generation-of-maslow/18773/268 "2023-08-04T00:22:52Z")

</div>

Thanks for the link.

With regard to this:

> [@dlang](#):
>
> getting the maslow specific changes upstream into fluidNC

Before that, I’d recommend looking into this

 ![image](https://canada1.discourse-cdn.com/flex031/uploads/maslowcnc/original/3X/f/0/f020bb1b6a7b9efcb56369d7de0666ff5741f5f7.png)

---

<div class="post-metadata">

**Author:** ![dlang](https://yyz1.discourse-cdn.com/flex031/user_avatar/forums.maslowcnc.com/dlang/32/859_2.png) [@dlang](https://forums.maslowcnc.com/u/dlang)\
**Post date:** [August 4, 2023, 12:36am UTC](https://forums.maslowcnc.com/t/maslow-4-the-next-generation-of-maslow/18773/269 "2023-08-04T00:36:26Z")

</div>

the two problems go hand-in-hand, the more commits you carry vs upstream, the  
more work it is to integrate upstrem fixes.

David Lang

---

<div class="post-metadata">

**Author:** ![bar](https://yyz1.discourse-cdn.com/flex031/user_avatar/forums.maslowcnc.com/bar/32/10_2.png) [@bar](https://forums.maslowcnc.com/u/bar)\
**Post date:** [August 4, 2023, 2:09am UTC](https://forums.maslowcnc.com/t/maslow-4-the-next-generation-of-maslow/18773/270 "2023-08-04T02:09:49Z")

</div>

I’m not too worried about re-integration because the Maslow elements are pretty separate, but it is on the todo list. The big issue is that the main FluidNC branch doesn’t support the S3 processor yet, they’re still on the S2

---

<div class="post-metadata">

**Author:** ![md8n](https://yyz1.discourse-cdn.com/flex031/user_avatar/forums.maslowcnc.com/md8n/32/28197_2.png) [@md8n](https://forums.maslowcnc.com/u/md8n)\
**Post date:** [August 4, 2023, 2:59am UTC](https://forums.maslowcnc.com/t/maslow-4-the-next-generation-of-maslow/18773/271 "2023-08-04T02:59:37Z")

</div>

> [@bar](#):
>
> The big issue is that the main FluidNC branch doesn’t support the S3 processor yet

Where is the S3 stuff in the Repo? Now that I have a couple of them I’d like to have a play around

---

<div class="post-metadata">

**Author:** ![jonatpridesleap](https://yyz1.discourse-cdn.com/flex031/user_avatar/forums.maslowcnc.com/jonatpridesleap/32/6639_2.png) [@jonatpridesleap](https://forums.maslowcnc.com/u/jonatpridesleap)\
**Post date:** [August 4, 2023, 6:07am UTC](https://forums.maslowcnc.com/t/maslow-4-the-next-generation-of-maslow/18773/272 "2023-08-04T06:07:34Z")

</div>

so for the purposes of Maslow4, should we just consider your fork the “master” and submit out commits to your repo?

---

<div class="post-metadata">

**Author:** ![jwolter](https://yyz1.discourse-cdn.com/flex031/user_avatar/forums.maslowcnc.com/jwolter/32/30787_2.png) [@jwolter](https://forums.maslowcnc.com/u/jwolter)\
**Post date:** [August 4, 2023, 6:29am UTC](https://forums.maslowcnc.com/t/maslow-4-the-next-generation-of-maslow/18773/273 "2023-08-04T06:29:40Z")

</div>

My wife is already texting me suggestions for M4 projects. 🤔

---

<div class="post-metadata">

**Author:** ![dlang](https://yyz1.discourse-cdn.com/flex031/user_avatar/forums.maslowcnc.com/dlang/32/859_2.png) [@dlang](https://forums.maslowcnc.com/u/dlang)\
**Post date:** [August 4, 2023, 6:48am UTC](https://forums.maslowcnc.com/t/maslow-4-the-next-generation-of-maslow/18773/274 "2023-08-04T06:48:56Z")

</div>

At least for now, Yes.

based on past experience, that may change in the future, but for now Bar’s fork  
is the maslow master

David Lang

---

<div class="post-metadata">

**Author:** ![Keith](https://yyz1.discourse-cdn.com/flex031/user_avatar/forums.maslowcnc.com/keith/32/1332_2.png) [@Keith](https://forums.maslowcnc.com/u/Keith)\
**Post date:** [August 4, 2023, 2:08pm UTC](https://forums.maslowcnc.com/t/maslow-4-the-next-generation-of-maslow/18773/275 "2023-08-04T14:08:01Z")

</div>

> [@jwolter](#):
>
> My wife is already texting me suggestions for M4 projects.

Sounds like job (and new toy) security! 🙂

---

<div class="post-metadata">

**Author:** ![mooselake](https://yyz1.discourse-cdn.com/flex031/user_avatar/forums.maslowcnc.com/mooselake/32/6218_2.png) [@mooselake](https://forums.maslowcnc.com/u/mooselake)\
**Post date:** [August 4, 2023, 3:54pm UTC](https://forums.maslowcnc.com/t/maslow-4-the-next-generation-of-maslow/18773/276 "2023-08-04T15:54:57Z")

</div>

FNC can be a fast moving target with a release every few weeks. I need to get back to my FNC rotary axis machine (too busy roughing out wood bowl blanks on the non-CNC lathe, plus hurrying the never-ending shop build for a maslow4), which hasn’t been updated since last summer.

---

<div class="post-metadata">

**Author:** ![bcj](https://avatars.discourse-cdn.com/v4/letter/b/f05b48/32.png) [@bcj](https://forums.maslowcnc.com/u/bcj)\
**Post date:** [August 4, 2023, 5:11pm UTC](https://forums.maslowcnc.com/t/maslow-4-the-next-generation-of-maslow/18773/277 "2023-08-04T17:11:52Z")

</div>

Guess I’m feeling a little let down, having not received the “insider” notification that I singed up for and now that’s closed on Kickstarter.

Probably for the best. So many projects.

---

<div class="post-metadata">

**Author:** ![jonatpridesleap](https://yyz1.discourse-cdn.com/flex031/user_avatar/forums.maslowcnc.com/jonatpridesleap/32/6639_2.png) [@jonatpridesleap](https://forums.maslowcnc.com/u/jonatpridesleap)\
**Post date:** [August 4, 2023, 5:38pm UTC](https://forums.maslowcnc.com/t/maslow-4-the-next-generation-of-maslow/18773/278 "2023-08-04T17:38:50Z")

</div>

Is the Kickstarter closed??

I just checked and it looks like it is still possible to back the project.

---

<div class="post-metadata">

**Author:** ![bar](https://yyz1.discourse-cdn.com/flex031/user_avatar/forums.maslowcnc.com/bar/32/10_2.png) [@bar](https://forums.maslowcnc.com/u/bar)\
**Post date:** [August 4, 2023, 5:48pm UTC](https://forums.maslowcnc.com/t/maslow-4-the-next-generation-of-maslow/18773/279 "2023-08-04T17:48:06Z")

</div>

You didn’t get the email? I’m sorry! I’m not sure how that could have happened 🙁

@jonatpridesleap is right, it’s not too late. Just the insider version is closed.

---

<div class="post-metadata">

**Author:** ![Enea](https://avatars.discourse-cdn.com/v4/letter/e/45deac/32.png) [@Enea](https://forums.maslowcnc.com/u/Enea)\
**Post date:** [August 6, 2023, 1:26pm UTC](https://forums.maslowcnc.com/t/maslow-4-the-next-generation-of-maslow/18773/280 "2023-08-06T13:26:34Z")

</div>

Hello everyone, I have a question. With the management program supplied with the maslow 4, would it be possible to add a command to feel the piece to obtain the alignment coordinates of the piece to be machined?

[Previous page](https://forums.maslowcnc.com/t/maslow-4-the-next-generation-of-maslow/18773.md?page=13)

[Next page](https://forums.maslowcnc.com/t/maslow-4-the-next-generation-of-maslow/18773.md?page=15)
