# Maslow 4 - The next generation of Maslow **URL:** \ **Category:** Technical Details\ **Created:** [March 19, 2023, 5:56pm UTC](https://forums.maslowcnc.com/t/maslow-4-the-next-generation-of-maslow/18773 "2023-03-19T17:56:20Z")\ **Posts on this page:** 1\ **Showing post:** 258
**Author:** ![Joshua](https://avatars.discourse-cdn.com/v4/letter/j/48db29/32.png) [@Joshua](https://forums.maslowcnc.com/u/Joshua)\ **Post date:** [August 3, 2023, 4:04pm UTC](https://forums.maslowcnc.com/t/maslow-4-the-next-generation-of-maslow/18773/258 "2023-08-03T16:04:02Z")
I received the email notification for Maslow4 and began scrolling through this forum topic. Maslow4 appears to take all the learning from the previous iteration and bundle it up. @bar, thanks for your efforts. I appreciate your dedication to open-source; it motivates me to contribute more. I had contributed back in the day, and would be willing again if there were a problem which was not well supported by the other contributors’ skill-sets. Many of the core pieces of the [Holey Calibration](https://forums.maslowcnc.com/t/holey-triangular-calibration/6240) were implemented by me, and I think that kind of math/calibration is my skill-set. While I haven’t seen it, I believe the foundations of the new 4-link automatic calibration are similar to those of the Holey Calibration. Let me know if there is a targeted activity in that space which is a specific pain-point. It is good to see some old familiar names: @madgrizzle and @dlang. I am still looking for @MeticulousMaynard, @Gero, and a few others who were significant contributors back in the day. I now have 3 little @Joshua’s who are just on the fringes of being able to tinker with a Maslow4. I am considering a purchase of the new Maslow4, but I might get reprimanded by my boss (wife). --- _[View the full topic](https://forums.maslowcnc.com/t/maslow-4-the-next-generation-of-maslow/18773)._