# Maslow kit with Z axis, 2hp porter cable router and sled set up - SOLD

**URL:** <https://forums.maslowcnc.com/t/maslow-kit-with-z-axis-2hp-porter-cable-router-and-sled-set-up-sold/16698>\
**Category:** Swap Meet\
**Created:** [May 30, 2021, 4:36pm UTC](https://forums.maslowcnc.com/t/maslow-kit-with-z-axis-2hp-porter-cable-router-and-sled-set-up-sold/16698 "2021-05-30T16:36:45Z")\
**Posts on this page:** 5\
**Page:** 1

<div class="post-metadata">

**Author:** ![Zbrain](https://avatars.discourse-cdn.com/v4/letter/z/dc4da7/32.png) [@Zbrain](https://forums.maslowcnc.com/u/Zbrain)\
**Post date:** [May 30, 2021, 4:36pm UTC](https://forums.maslowcnc.com/t/maslow-kit-with-z-axis-2hp-porter-cable-router-and-sled-set-up-sold/16698/1 "2021-05-30T16:36:45Z")

</div>

Hey there- I had a my Maslow setup for a couple years- and loved to tinker with it, but ran out of room. I disassembled it with the intent of rebuilding it in the shed- but with a smaller footprint, and just never got around to it.  
All works great. The Z-axis is custom on a lead screw setup similar to the meticulous Z- and comes with extra motors, screws, and bits.

I would like to sell this kit and get a smaller table CNC- or am willing to trade if you like.

I’m in the Los Angeles Area, Ventura County area if you are interested, or I can ship the whole package out.

Cheers!

---

<div class="post-metadata">

**Author:** ![glassice](https://yyz1.discourse-cdn.com/flex031/user_avatar/forums.maslowcnc.com/glassice/32/20199_2.png) [@glassice](https://forums.maslowcnc.com/u/glassice)\
**Post date:** [June 3, 2021, 6:33pm UTC](https://forums.maslowcnc.com/t/maslow-kit-with-z-axis-2hp-porter-cable-router-and-sled-set-up-sold/16698/2 "2021-06-03T18:33:56Z")

</div>

why not not post a price

---

<div class="post-metadata">

**Author:** ![Zbrain](https://avatars.discourse-cdn.com/v4/letter/z/dc4da7/32.png) [@Zbrain](https://forums.maslowcnc.com/u/Zbrain)\
**Post date:** [June 3, 2021, 6:59pm UTC](https://forums.maslowcnc.com/t/maslow-kit-with-z-axis-2hp-porter-cable-router-and-sled-set-up-sold/16698/3 "2021-06-03T18:59:17Z")

</div>

Thanks @glassice - I would prefer a trade- but would let the entire setup go for $350 with the router.

---

<div class="post-metadata">

**Author:** ![glassice](https://yyz1.discourse-cdn.com/flex031/user_avatar/forums.maslowcnc.com/glassice/32/20199_2.png) [@glassice](https://forums.maslowcnc.com/u/glassice)\
**Post date:** [June 4, 2021, 1:35am UTC](https://forums.maslowcnc.com/t/maslow-kit-with-z-axis-2hp-porter-cable-router-and-sled-set-up-sold/16698/4 "2021-06-04T01:35:07Z")

</div>

do you have pictures of what you have

---

<div class="post-metadata">

**Author:** ![Zbrain](https://avatars.discourse-cdn.com/v4/letter/z/dc4da7/32.png) [@Zbrain](https://forums.maslowcnc.com/u/Zbrain)\
**Post date:** [June 10, 2021, 4:26pm UTC](https://forums.maslowcnc.com/t/maslow-kit-with-z-axis-2hp-porter-cable-router-and-sled-set-up-sold/16698/5 "2021-06-10T16:26:43Z")

</div>

Sold- Thanks all who looked.