# Maslow M2 not recognised win10

**URL:** <https://forums.maslowcnc.com/t/maslow-m2-not-recognised-win10/15341>\
**Category:** Troubleshooting\
**Created:** [November 29, 2020, 2:02am UTC](https://forums.maslowcnc.com/t/maslow-m2-not-recognised-win10/15341 "2020-11-29T02:02:57Z")\
**Posts on this page:** 1\
**Showing post:** 11

<div class="post-metadata">

**Author:** ![Orob](https://yyz1.discourse-cdn.com/flex031/user_avatar/forums.maslowcnc.com/orob/32/16344_2.png) [@Orob](https://forums.maslowcnc.com/u/Orob)\
**Post date:** [November 29, 2020, 5:08pm UTC](https://forums.maslowcnc.com/t/maslow-m2-not-recognised-win10/15341/11 "2020-11-29T17:08:54Z")

</div>

Install the Arduino ide and then instal the 32 bit due board support for it. Example [here](https://forums.maslowcnc.com/t/arduino-ide-basics/15018). The thing that is strange to me is that the system recognizes it is the programming port, which should work.

Once you get the Arduino ide loaded, open a serial port monitor and copy paste the output here. You may want to turn off auto scroll.

---

_[View the full topic](https://forums.maslowcnc.com/t/maslow-m2-not-recognised-win10/15341)._