# Maslow Pen Plotter Application

**URL:** <https://forums.maslowcnc.com/t/maslow-pen-plotter-application/9181>\
**Category:** No Judgement\
**Created:** [March 17, 2019, 8:57pm UTC](https://forums.maslowcnc.com/t/maslow-pen-plotter-application/9181 "2019-03-17T20:57:52Z")\
**Posts on this page:** 3\
**Page:** 1

<div class="post-metadata">

**Author:** ![Cole\_Stanton](https://yyz1.discourse-cdn.com/flex031/user_avatar/forums.maslowcnc.com/cole_stanton/32/11976_2.png) [@Cole\_Stanton](https://forums.maslowcnc.com/u/Cole_Stanton)\
**Post date:** [March 17, 2019, 8:57pm UTC](https://forums.maslowcnc.com/t/maslow-pen-plotter-application/9181/1 "2019-03-17T20:57:52Z")

</div>

I have been really wanting to build an upright pen plotter to draw on a white board, and was wondering if it would be possible to apply the Maslow cnc to that application. I would definitely scale down the motors on my own(would not buy kit but just parts of it), but I have very little programming knowledge and am unsure how I would adjust the settings involved in the project.  
Any advice would be greatly welcomed, thank you!

---

<div class="post-metadata">

**Author:** ![TheMerryYeoman](https://yyz1.discourse-cdn.com/flex031/user_avatar/forums.maslowcnc.com/themerryyeoman/32/8009_2.png) [@TheMerryYeoman](https://forums.maslowcnc.com/u/TheMerryYeoman)\
**Post date:** [March 17, 2019, 11:11pm UTC](https://forums.maslowcnc.com/t/maslow-pen-plotter-application/9181/2 "2019-03-17T23:11:28Z")

</div>

Welcome to the forum!  
I found this that might help… Same concept as Maslow…

[![](https://img.youtube.com/vi/T0jwdrgVBBc/maxresdefault.jpg "Make Arduino XY Plotter Drawing Robot") ](https://www.youtube.com/watch?v=T0jwdrgVBBc)

Check it out! 😃  
In the description it says it is a tutorial or something like that.

---

<div class="post-metadata">

**Author:** ![Keith](https://yyz1.discourse-cdn.com/flex031/user_avatar/forums.maslowcnc.com/keith/32/1332_2.png) [@Keith](https://forums.maslowcnc.com/u/Keith)\
**Post date:** [March 18, 2019, 2:19pm UTC](https://forums.maslowcnc.com/t/maslow-pen-plotter-application/9181/3 "2019-03-18T14:19:17Z")

</div>

If all you want to do is draw on a whiteboard, Maslow is likely more than you would need.

That said, you could certainly set it up to both draw on a whiteboard and cut things. I have been adapting my maslow to hold a sharpie so I can use it to draw on plywood.