# Maslow plotter, or getting used to Maslow without spoiling wood

**URL:** <https://forums.maslowcnc.com/t/maslow-plotter-or-getting-used-to-maslow-without-spoiling-wood/21237>\
**Category:** Projects\
**Created:** [May 26, 2024, 8:56pm UTC](https://forums.maslowcnc.com/t/maslow-plotter-or-getting-used-to-maslow-without-spoiling-wood/21237 "2024-05-26T20:56:17Z")\
**Posts on this page:** 4\
**Page:** 3

<div class="post-metadata">

**Author:** ![Frank\_Currie](https://yyz1.discourse-cdn.com/flex031/user_avatar/forums.maslowcnc.com/frank_currie/32/24040_2.png) [@Frank\_Currie](https://forums.maslowcnc.com/u/Frank_Currie)\
**Post date:** [June 10, 2024, 1:37pm UTC](https://forums.maslowcnc.com/t/maslow-plotter-or-getting-used-to-maslow-without-spoiling-wood/21237/41 "2024-06-10T13:37:16Z")

</div>

Caveat - I haven’t tested this yet. It looks like I’ll need to remove the router to make it fit but look feasible. I also rescaled the pen holder down by 1% so as to make it a little easier to screw into the mount.

I’ve adjusted to fit:

1. Sharpie Mini - [https://www.amazon.ca/dp/B0845ST4SF](https://www.amazon.ca/dp/B0845ST4SF)
2. Spring - [https://www.amazon.ca/dp/B0C33CQ5KS](https://www.amazon.ca/dp/B0C33CQ5KS)

[Maslow\_Sharpie\_holder.stl](https://forums.maslowcnc.com/uploads/short-url/qb6Tqmgn5xXUnURF0CNIJ7FoyqT.stl) (380.5 KB)

---

<div class="post-metadata">

**Author:** ![marzsman](https://avatars.discourse-cdn.com/v4/letter/m/919ad9/32.png) [@marzsman](https://forums.maslowcnc.com/u/marzsman)\
**Post date:** [June 10, 2024, 2:00pm UTC](https://forums.maslowcnc.com/t/maslow-plotter-or-getting-used-to-maslow-without-spoiling-wood/21237/42 "2024-06-10T14:00:11Z")

</div>

I don’t have mini Sharpies, so I could be wrong, but it seems like the Chinese markers I use are very similar in dimensions.  
To fit them under the router, I have to cut them a little shorter, about 1cm. Then, I fill the end with a bit of hot glue.

 ![PXL_20240605_081343862](https://canada1.discourse-cdn.com/flex031/uploads/maslowcnc/original/3X/b/2/b2226a95e0261f604e47620658220dc9226fdbad.jpeg)

---

<div class="post-metadata">

**Author:** ![Charlienofun](https://yyz1.discourse-cdn.com/flex031/user_avatar/forums.maslowcnc.com/charlienofun/32/24942_2.png) [@Charlienofun](https://forums.maslowcnc.com/u/Charlienofun)\
**Post date:** [June 11, 2024, 3:20pm UTC](https://forums.maslowcnc.com/t/maslow-plotter-or-getting-used-to-maslow-without-spoiling-wood/21237/43 "2024-06-11T15:20:18Z")

</div>

Nice work!

---

<div class="post-metadata">

**Author:** ![Doc\_Hogan](https://yyz1.discourse-cdn.com/flex031/user_avatar/forums.maslowcnc.com/doc_hogan/32/24388_2.png) [@Doc\_Hogan](https://forums.maslowcnc.com/u/Doc_Hogan)\
**Post date:** [June 12, 2024, 12:03am UTC](https://forums.maslowcnc.com/t/maslow-plotter-or-getting-used-to-maslow-without-spoiling-wood/21237/44 "2024-06-12T00:03:07Z")

</div>

Perfect, thanks. Yeah, I’d already expected to have to shorten the Mini. I’ll try to print the mount this weekend. If post if any mods are needed

[Previous page](https://forums.maslowcnc.com/t/maslow-plotter-or-getting-used-to-maslow-without-spoiling-wood/21237.md?page=2)