# Microphone stand thing

**URL:** <https://forums.maslowcnc.com/t/microphone-stand-thing/2675>\
**Category:** Projects\
**Created:** [March 11, 2018, 6:20pm UTC](https://forums.maslowcnc.com/t/microphone-stand-thing/2675 "2018-03-11T18:20:21Z")\
**Posts on this page:** 5\
**Page:** 1

<div class="post-metadata">

**Author:** ![KingOfScolboa](https://yyz1.discourse-cdn.com/flex031/user_avatar/forums.maslowcnc.com/kingofscolboa/32/2438_2.png) [@KingOfScolboa](https://forums.maslowcnc.com/u/KingOfScolboa)\
**Post date:** [March 11, 2018, 6:20pm UTC](https://forums.maslowcnc.com/t/microphone-stand-thing/2675/1 "2018-03-11T18:20:21Z")

</div>

I’ve this small Rode microphone for a while now and the cradle that is comes with is long broken so I made this…

 ![mic-parts](https://canada1.discourse-cdn.com/flex031/uploads/maslowcnc/original/2X/7/7c34273b70a6b43d3a048466b28ec91a39095424.jpg)

 ![mic-finished](https://canada1.discourse-cdn.com/flex031/uploads/maslowcnc/original/2X/a/a84aa3c4d54b6d88a723cded35d113fa48a02241.jpg)

 ![mic-holder](https://canada1.discourse-cdn.com/flex031/uploads/maslowcnc/original/2X/6/6c092a68cc2b3c3449d75c85f919eb240381f1d8.jpg)

I probably won’t use this much and I’m not sure how effective the cradle is but i’m pretty pleased because this is the first thing i’ve drawn from scratch myself. I included little recesses for the rubber bands that could have been a tad deeper. I cut a dog bone in the base when a rounded square would have been fine because i ended up rounding the edges. Oh well, Live and learn.

I’ve also been using the Maslow to help create this tool storage thing…

 ![tool-storage](https://canada1.discourse-cdn.com/flex031/uploads/maslowcnc/original/2X/7/70dc0986204bffff83da2436d2b1b374087b348e.jpg)

---

<div class="post-metadata">

**Author:** ![Bee](https://yyz1.discourse-cdn.com/flex031/user_avatar/forums.maslowcnc.com/bee/32/2160_2.png) [@Bee](https://forums.maslowcnc.com/u/Bee)\
**Post date:** [March 11, 2018, 7:12pm UTC](https://forums.maslowcnc.com/t/microphone-stand-thing/2675/2 "2018-03-11T19:12:51Z")

</div>

Keep up the great work.

Thank you

---

<div class="post-metadata">

**Author:** ![akamcfly](https://yyz1.discourse-cdn.com/flex031/user_avatar/forums.maslowcnc.com/akamcfly/32/2086_2.png) [@akamcfly](https://forums.maslowcnc.com/u/akamcfly)\
**Post date:** [March 11, 2018, 10:00pm UTC](https://forums.maslowcnc.com/t/microphone-stand-thing/2675/3 "2018-03-11T22:00:04Z")

</div>

I think I need a rolling tool wall now. Some tools just don’t really belong in drawers and a French cleat or pegboard wall would have me reaching over work benches to grab things. Being able to roll all the levels, clamps, squares etc to a work table or assembly area makes more sense than wearing a trail into my floor going back and forth for them.

What a smart idea. 😃

---

<div class="post-metadata">

**Author:** ![KingOfScolboa](https://yyz1.discourse-cdn.com/flex031/user_avatar/forums.maslowcnc.com/kingofscolboa/32/2438_2.png) [@KingOfScolboa](https://forums.maslowcnc.com/u/KingOfScolboa)\
**Post date:** [March 12, 2018, 12:14pm UTC](https://forums.maslowcnc.com/t/microphone-stand-thing/2675/4 "2018-03-12T12:14:51Z")

</div>

Thanks! I’m planning to do French cleats. Wheels seem to make sense although I do have a vision of me rolling it over a bump and everything falling off or tipping it over.

---

<div class="post-metadata">

**Author:** ![bar](https://yyz1.discourse-cdn.com/flex031/user_avatar/forums.maslowcnc.com/bar/32/10_2.png) [@bar](https://forums.maslowcnc.com/u/bar)\
**Post date:** [March 12, 2018, 4:44pm UTC](https://forums.maslowcnc.com/t/microphone-stand-thing/2675/5 "2018-03-12T16:44:02Z")

</div>

This is awesome! I love the microphone stand, especially how you planned ahead and put in the slot for where the phone would go. Very cool.