# Missing bearings

**URL:** <https://forums.maslowcnc.com/t/missing-bearings/23883>\
**Category:** Frame\
**Created:** [April 24, 2025, 9:45am UTC](https://forums.maslowcnc.com/t/missing-bearings/23883 "2025-04-24T09:45:46Z")\
**Posts on this page:** 6\
**Page:** 1

<div class="post-metadata">

**Author:** ![ignuf](https://avatars.discourse-cdn.com/v4/letter/i/43a26b/32.png) [@ignuf](https://forums.maslowcnc.com/u/ignuf)\
**Post date:** [April 24, 2025, 9:45am UTC](https://forums.maslowcnc.com/t/missing-bearings/23883/1 "2025-04-24T09:45:46Z")

</div>

Hi, hope all is well !  
I’m currently assembling 4.1 kit but missing two of the bearings for one of the arms , and also one of the gears (that mount on the motor spindle) doesn’t have any thread where grub screw needs to go , is there way of ordering missing / replacement parts please ?  
I’m based in the UK

All the best  
G

---

<div class="post-metadata">

**Author:** ![Andrew\_Matthews](https://yyz1.discourse-cdn.com/flex031/user_avatar/forums.maslowcnc.com/andrew_matthews/32/27845_2.png) [@Andrew\_Matthews](https://forums.maslowcnc.com/u/Andrew_Matthews)\
**Post date:** [April 24, 2025, 12:19pm UTC](https://forums.maslowcnc.com/t/missing-bearings/23883/2 "2025-04-24T12:19:25Z")

</div>

The bearings are standard MR148ZZ bearings  
You should be able to get the locally fairly cheaply, and quickly.  
Eg [MR148ZZ Unbranded | Miniature Type Deep Groove Ball Bearing | 8mm X 14mm X 4mm](https://www.bearingsrus.co.uk/mr148zz-unm)  
I too, had two missing ☹

Can’t help with the gears.  
Email Bar at [info@maslowcnc.com](mailto:info@maslowcnc.com)

Andrew

---

<div class="post-metadata">

**Author:** ![ignuf](https://avatars.discourse-cdn.com/v4/letter/i/43a26b/32.png) [@ignuf](https://forums.maslowcnc.com/u/ignuf)\
**Post date:** [April 24, 2025, 2:00pm UTC](https://forums.maslowcnc.com/t/missing-bearings/23883/3 "2025-04-24T14:00:01Z")

</div>

> [@Andrew\_Matthews](#):
>
> MR148ZZ

That’s awesome ! Thanks Andrew 🙏👍

---

<div class="post-metadata">

**Author:** ![ian\_ab](https://avatars.discourse-cdn.com/v4/letter/i/a587f6/32.png) [@ian\_ab](https://forums.maslowcnc.com/u/ian_ab)\
**Post date:** [April 24, 2025, 2:59pm UTC](https://forums.maslowcnc.com/t/missing-bearings/23883/4 "2025-04-24T14:59:41Z")

</div>

Should have 2 spare bearings, did you put one between motor and gear. You don’t need one there. I left the grub screws out after I found 2 of them floating around when I dismantled the arms for the upgrade. Haven’t noticed any problems operating there yet.

---

<div class="post-metadata">

**Author:** ![TimS](https://yyz1.discourse-cdn.com/flex031/user_avatar/forums.maslowcnc.com/tims/32/17329_2.png) [@TimS](https://forums.maslowcnc.com/u/TimS)\
**Post date:** [April 24, 2025, 5:34pm UTC](https://forums.maslowcnc.com/t/missing-bearings/23883/5 "2025-04-24T17:34:41Z")

</div>

> [@Bearing part number](https://forums.maslowcnc.com/t/bearing-part-number/23767/2):
>
> You should have got 30 bearings in 3 tubes. The on the top of the arm that has the motor mounted to it. The hole that the motor shaft goes through doesn’t get a bearing, only the bottom hole for the motor. All others will get a bearing on the top and bottom. I made this mistake but caught after assembling one arm.

See above link for what I found after watching the 4.1 arm upgrade kit video. Luckily I only had 1 arm together. Video is at the link below.

> **[4.1 Upgrade Instructions — Maslow](https://www.maslowcnc.com/41-upgrade-instructions)**

---

<div class="post-metadata">

**Author:** ![ignuf](https://avatars.discourse-cdn.com/v4/letter/i/43a26b/32.png) [@ignuf](https://forums.maslowcnc.com/u/ignuf)\
**Post date:** [April 24, 2025, 6:31pm UTC](https://forums.maslowcnc.com/t/missing-bearings/23883/6 "2025-04-24T18:31:32Z")

</div>

Ah ! Cool ok I’ll give it another go thanks Tim 👍
