# Missing the cable for z-axis **URL:** \ **Category:** Electronics\ **Created:** [December 24, 2018, 4:33pm UTC](https://forums.maslowcnc.com/t/missing-the-cable-for-z-axis/8215 "2018-12-24T16:33:59Z")\ **Posts on this page:** 10\ **Page:** 1
**Author:** ![jpatte4](https://avatars.discourse-cdn.com/v4/letter/j/f04885/32.png) [@jpatte4](https://forums.maslowcnc.com/u/jpatte4)\ **Post date:** [December 24, 2018, 4:33pm UTC](https://forums.maslowcnc.com/t/missing-the-cable-for-z-axis/8215/1 "2018-12-24T16:33:59Z")
I finally was able to unpack and assemble my Maslow and I am missing the cable that runs from the z-axis motor to the controller board. I went to the store to see if I could replace it but could not find it. How di I get the cable? ---
**Author:** ![Gero](https://yyz1.discourse-cdn.com/flex031/user_avatar/forums.maslowcnc.com/gero/32/17487_2.png) [@Gero](https://forums.maslowcnc.com/u/Gero)\ **Post date:** [December 24, 2018, 4:43pm UTC](https://forums.maslowcnc.com/t/missing-the-cable-for-z-axis/8215/2 "2018-12-24T16:43:27Z")
From where did you get the kit? From what batch is it? ---
**Author:** ![jpatte4](https://avatars.discourse-cdn.com/v4/letter/j/f04885/32.png) [@jpatte4](https://forums.maslowcnc.com/u/jpatte4)\ **Post date:** [December 24, 2018, 5:34pm UTC](https://forums.maslowcnc.com/t/missing-the-cable-for-z-axis/8215/3 "2018-12-24T17:34:12Z")
I got the kit from Maslow in June, It was delivered at the very end of June if I recall. I was waiting for my new shop and ran into delays with the east coast storms. ![20181224_122036_resized](https://canada1.discourse-cdn.com/flex031/uploads/maslowcnc/original/2X/8/858a9353bc25f55825e2a66f5eae7cd62a60fb5f.jpeg) ---
**Author:** ![Gero](https://yyz1.discourse-cdn.com/flex031/user_avatar/forums.maslowcnc.com/gero/32/17487_2.png) [@Gero](https://forums.maslowcnc.com/u/Gero)\ **Post date:** [December 24, 2018, 5:52pm UTC](https://forums.maslowcnc.com/t/missing-the-cable-for-z-axis/8215/4 "2018-12-24T17:52:34Z")
In that case would drop @hannah or @bar a mail, but by mentioning them they are already on this post 😉 I hope/sure they can help you out. ---
**Author:** ![jpatte4](https://avatars.discourse-cdn.com/v4/letter/j/f04885/32.png) [@jpatte4](https://forums.maslowcnc.com/u/jpatte4)\ **Post date:** [December 24, 2018, 5:55pm UTC](https://forums.maslowcnc.com/t/missing-the-cable-for-z-axis/8215/5 "2018-12-24T17:55:59Z")
I will give them time to reply b4 sending them an e-mail. TY ---
**Author:** ![Gero](https://yyz1.discourse-cdn.com/flex031/user_avatar/forums.maslowcnc.com/gero/32/17487_2.png) [@Gero](https://forums.maslowcnc.com/u/Gero)\ **Post date:** [December 24, 2018, 6:02pm UTC](https://forums.maslowcnc.com/t/missing-the-cable-for-z-axis/8215/6 "2018-12-24T18:02:08Z")
If you still have the email conversation from the order, you should have Hannah’s email and I would go the second track to speed things up. ---
**Author:** ![jpatte4](https://avatars.discourse-cdn.com/v4/letter/j/f04885/32.png) [@jpatte4](https://forums.maslowcnc.com/u/jpatte4)\ **Post date:** [December 24, 2018, 6:11pm UTC](https://forums.maslowcnc.com/t/missing-the-cable-for-z-axis/8215/7 "2018-12-24T18:11:33Z")
I should. I try to save everything lol ---
**Author:** ![jpatte4](https://avatars.discourse-cdn.com/v4/letter/j/f04885/32.png) [@jpatte4](https://forums.maslowcnc.com/u/jpatte4)\ **Post date:** [December 24, 2018, 6:26pm UTC](https://forums.maslowcnc.com/t/missing-the-cable-for-z-axis/8215/8 "2018-12-24T18:26:42Z")
I have @mail44 type of addresses. no @hannah or @ bar. is it [maslowcnc.com](http://maslowcnc.com)@bar or hannah or can I reply to any order e-mail. I did find out it shipped on 7/17/18? Order Shipped: #09003 ---
**Author:** ![Gero](https://yyz1.discourse-cdn.com/flex031/user_avatar/forums.maslowcnc.com/gero/32/17487_2.png) [@Gero](https://forums.maslowcnc.com/u/Gero)\ **Post date:** [December 24, 2018, 6:34pm UTC](https://forums.maslowcnc.com/t/missing-the-cable-for-z-axis/8215/9 "2018-12-24T18:34:42Z")
I ordered 2016 and clean out emails, so I can’t help. But Bar will show up on this post and help out from my experience. ---
**Author:** ![jpatte4](https://avatars.discourse-cdn.com/v4/letter/j/f04885/32.png) [@jpatte4](https://forums.maslowcnc.com/u/jpatte4)\ **Post date:** [December 24, 2018, 6:35pm UTC](https://forums.maslowcnc.com/t/missing-the-cable-for-z-axis/8215/10 "2018-12-24T18:35:38Z")
ok, thanks