# Mother(board) of all CNC

**URL:** https://forums.maslowcnc.com/t/mother-board-of-all-cnc/14017
**Category:** Found and Shared
**Created:** [July 18, 2020, 9:17pm UTC](https://forums.maslowcnc.com/t/mother-board-of-all-cnc/14017 "2020-07-18T21:17:30Z")
**Posts on this page:** 2
**Page:** 1

<div class="post-metadata">

### Author: ![Chad\_Marshall](https://yyz1.discourse-cdn.com/flex031/user_avatar/forums.maslowcnc.com/chad_marshall/32/16412_2.png) [@Chad\_Marshall](https://forums.maslowcnc.com/u/Chad_Marshall)
#### Post date: [July 18, 2020, 9:17pm UTC](https://forums.maslowcnc.com/t/mother-board-of-all-cnc/14017/1 "2020-07-18T21:17:31Z")

</div>

This is way over my head but from what I could grasp this is very cool.

Interested in what the community thinks, and @bar of course.

[https://hackaday.com/2020/07/17/the-motherboard-of-all-cnc-controllers/](https://hackaday.com/2020/07/17/the-motherboard-of-all-cnc-controllers/)

---

<div class="post-metadata">

### Author: ![Gero](https://yyz1.discourse-cdn.com/flex031/user_avatar/forums.maslowcnc.com/gero/32/17487_2.png) [@Gero](https://forums.maslowcnc.com/u/Gero)
#### Post date: [July 18, 2020, 9:21pm UTC](https://forums.maslowcnc.com/t/mother-board-of-all-cnc/14017/2 "2020-07-18T21:21:31Z")

</div>

😉 [ESP32 Ground Control and Firmware in One](https://forums.maslowcnc.com/t/esp32-ground-control-and-firmware-in-one/10708)  
Scroll down to post 71