# Motor won't stop spinning

**URL:** <https://forums.maslowcnc.com/t/motor-wont-stop-spinning/1869>\
**Category:** Hardware\
**Created:** [January 12, 2018, 3:45am UTC](https://forums.maslowcnc.com/t/motor-wont-stop-spinning/1869 "2018-01-12T03:45:00Z")\
**Posts on this page:** 3\
**Page:** 2

<div class="post-metadata">

**Author:** ![CrazyPieGuy](https://yyz1.discourse-cdn.com/flex031/user_avatar/forums.maslowcnc.com/crazypieguy/32/2345_2.png) [@CrazyPieGuy](https://forums.maslowcnc.com/u/CrazyPieGuy)\
**Post date:** [January 13, 2018, 5:09am UTC](https://forums.maslowcnc.com/t/motor-wont-stop-spinning/1869/22 "2018-01-13T05:09:11Z")

</div>

Yeah, that would great. My shield order is order #06950 if you can add it into there to save on shipping.

As I’m thinking about it, I was getting pop ups telling me to recalibrate the chains as it couldn’t find the position of the sled, and one of the values was increasing with the motor. I don’t know if that answers your X,Y question differently or helps diagnose the problem.

---

<div class="post-metadata">

**Author:** ![bar](https://yyz1.discourse-cdn.com/flex031/user_avatar/forums.maslowcnc.com/bar/32/10_2.png) [@bar](https://forums.maslowcnc.com/u/bar)\
**Post date:** [January 13, 2018, 5:19pm UTC](https://forums.maslowcnc.com/t/motor-wont-stop-spinning/1869/23 "2018-01-13T17:19:32Z")

</div>

Great! It looks like the arduino shield is already shipped, but the arduino will be right behind it.

---

<div class="post-metadata">

**Author:** ![CrazyPieGuy](https://yyz1.discourse-cdn.com/flex031/user_avatar/forums.maslowcnc.com/crazypieguy/32/2345_2.png) [@CrazyPieGuy](https://forums.maslowcnc.com/u/CrazyPieGuy)\
**Post date:** [January 13, 2018, 5:32pm UTC](https://forums.maslowcnc.com/t/motor-wont-stop-spinning/1869/24 "2018-01-13T17:32:19Z")

</div>

Awesome, and thanks. Hopefully my Maslow will live out the rest of its life problem free.

[Previous page](https://forums.maslowcnc.com/t/motor-wont-stop-spinning/1869.md?page=1)