# Motors doing something not expected

**URL:** <https://forums.maslowcnc.com/t/motors-doing-something-not-expected/23131>\
**Category:** Hardware\
**Tags:** m4\
**Created:** [January 8, 2025, 1:59am UTC](https://forums.maslowcnc.com/t/motors-doing-something-not-expected/23131 "2025-01-08T01:59:24Z")\
**Posts on this page:** 2\
**Page:** 1

<div class="post-metadata">

**Author:** ![md8n](https://yyz1.discourse-cdn.com/flex031/user_avatar/forums.maslowcnc.com/md8n/32/28197_2.png) [@md8n](https://forums.maslowcnc.com/u/md8n)\
**Post date:** [January 8, 2025, 1:59am UTC](https://forums.maslowcnc.com/t/motors-doing-something-not-expected/23131/1 "2025-01-08T01:59:24Z")

</div>

Noticed something weird with one of the motors while running through re-calibration.

See for yourself - watch the black marks on various parts of the motor body.

In fact, the motor opposite this one, is also doing the same thing.

---

<div class="post-metadata">

**Author:** ![bar](https://yyz1.discourse-cdn.com/flex031/user_avatar/forums.maslowcnc.com/bar/32/10_2.png) [@bar](https://forums.maslowcnc.com/u/bar)\
**Post date:** [January 8, 2025, 5:36am UTC](https://forums.maslowcnc.com/t/motors-doing-something-not-expected/23131/2 "2025-01-08T05:36:53Z")

</div>

![IMG_6730](https://canada1.discourse-cdn.com/flex031/uploads/maslowcnc/original/3X/6/5/6549cd53ba30b45ebcf2ff77c73dd94b5b00ce6c.jpeg)

I have seen that happen before. The solution is to tighten this screw which unfortunately is not so easy to do
