# Multiple Issues Recalibrating Machine

**URL:** <https://forums.maslowcnc.com/t/multiple-issues-recalibrating-machine/14765>\
**Category:** Troubleshooting\
**Tags:** calibration\
**Created:** [September 23, 2020, 10:44pm UTC](https://forums.maslowcnc.com/t/multiple-issues-recalibrating-machine/14765 "2020-09-23T22:44:46Z")\
**Posts on this page:** 1\
**Showing post:** 10

<div class="post-metadata">

**Author:** ![BigTroubleLittleCNC](https://avatars.discourse-cdn.com/v4/letter/b/b3f665/32.png) [@BigTroubleLittleCNC](https://forums.maslowcnc.com/u/BigTroubleLittleCNC)\
**Post date:** [September 24, 2020, 7:01pm UTC](https://forums.maslowcnc.com/t/multiple-issues-recalibrating-machine/14765/10 "2020-09-24T19:01:40Z")

</div>

> [@About the Troubleshooting category](https://forums.maslowcnc.com/t/about-the-troubleshooting-category/1838/1):
>
> Welcome to the Forum @BigTroubleLittleCNC!
> 
> > [@About the Troubleshooting category](https://forums.maslowcnc.com/t/about-the-troubleshooting-category/1838/1):
> >
> > The following information is essential for us to provide “Speed Support”:
> > 
> > - Your Operating System with version (Windows, Mac, Linux)
> > - Are you running the Arduino Mega or the DUE
> > - What kind of Motor-Shield do you have, original 2 chip, TLE5206 or the Due shield
> > - Firmware and Software you are using (GroundControl{discontinued}, WebControl or Makerverse and the **version numbers**.
> 
> Kind regards, Gero

-Windows 10  
-Arduino Mega  
-TLE5206 v1.4  
-Ground Control 1.26/ Firmware 1.26 (not sure if thats the information you needed here. let me know if you need something else)

Thanks for the help

---

_[View the full topic](https://forums.maslowcnc.com/t/multiple-issues-recalibrating-machine/14765)._
