# My first real cuts

**URL:** <https://forums.maslowcnc.com/t/my-first-real-cuts/6324>\
**Category:** Projects\
**Created:** [September 1, 2018, 11:54pm UTC](https://forums.maslowcnc.com/t/my-first-real-cuts/6324 "2018-09-01T23:54:24Z")\
**Posts on this page:** 2\
**Page:** 1

<div class="post-metadata">

**Author:** ![Wyatt](https://avatars.discourse-cdn.com/v4/letter/w/b19c9b/32.png) [@Wyatt](https://forums.maslowcnc.com/u/Wyatt)\
**Post date:** [September 1, 2018, 11:54pm UTC](https://forums.maslowcnc.com/t/my-first-real-cuts/6324/1 "2018-09-01T23:54:25Z")

</div>

![1535833928407-714593653](https://canada1.discourse-cdn.com/flex031/uploads/maslowcnc/original/2X/b/ba86ce63ee3b5c1208ff893cf3eeb215894e178b.jpeg) I think it came out ok for useing a 1/4 inch clearing bit. After I burned it and sanded it down it’s not bad for being a price of scrap slab. I also made my boss’s company logo and he loved it. Agian I used a 1/4 inch clearing bit (because I have yet to get my freaking bits in the mail…) and again it came out ok ![1535833882521267429655](https://canada1.discourse-cdn.com/flex031/uploads/maslowcnc/original/2X/a/abbfc7dd4d8dc4bb4739f645af978d527fa530eb.jpeg)

---

<div class="post-metadata">

**Author:** ![Mccand](https://avatars.discourse-cdn.com/v4/letter/m/ce7236/32.png) [@Mccand](https://forums.maslowcnc.com/u/Mccand)\
**Post date:** [September 2, 2018, 12:45am UTC](https://forums.maslowcnc.com/t/my-first-real-cuts/6324/2 "2018-09-02T00:45:36Z")

</div>

Love the gone fishing sign.