# Nesting in krabzcam?

**URL:** <https://forums.maslowcnc.com/t/nesting-in-krabzcam/25654>\
**Category:** Software\
**Created:** [March 25, 2026, 9:16am UTC](https://forums.maslowcnc.com/t/nesting-in-krabzcam/25654 "2026-03-25T09:16:40Z")\
**Posts on this page:** 3\
**Page:** 1

<div class="post-metadata">

**Author:** ![Caleb\_Yager](https://yyz1.discourse-cdn.com/flex031/user_avatar/forums.maslowcnc.com/caleb_yager/32/25070_2.png) [@Caleb\_Yager](https://forums.maslowcnc.com/u/Caleb_Yager)\
**Post date:** [March 25, 2026, 9:16am UTC](https://forums.maslowcnc.com/t/nesting-in-krabzcam/25654/1 "2026-03-25T09:16:40Z")

</div>

any way to nest things you want to cut out in Krabzcam to cut down on waste?

---

<div class="post-metadata">

**Author:** ![wouldchuck](https://avatars.discourse-cdn.com/v4/letter/w/58956e/32.png) [@wouldchuck](https://forums.maslowcnc.com/u/wouldchuck)\
**Post date:** [March 26, 2026, 2:26am UTC](https://forums.maslowcnc.com/t/nesting-in-krabzcam/25654/2 "2026-03-26T02:26:02Z")

</div>

You can move things around in inkscape or crabz Cam so cuts were inside voids. I would select the inner shape and set up paths in order from the inside out. If you paths are different colors in a vector drawing you can step through them in krabzcam or other Cam programs. Does that help?

---

<div class="post-metadata">

**Author:** ![Caleb\_Yager](https://yyz1.discourse-cdn.com/flex031/user_avatar/forums.maslowcnc.com/caleb_yager/32/25070_2.png) [@Caleb\_Yager](https://forums.maslowcnc.com/u/Caleb_Yager)\
**Post date:** [March 26, 2026, 2:57am UTC](https://forums.maslowcnc.com/t/nesting-in-krabzcam/25654/3 "2026-03-26T02:57:20Z")

</div>

I was wondering if there was a button to auto do that, but thank you, that does help, i will do it like that if i don’t just end up getting another nesting cam