# New Frame build experiences

**URL:** <https://forums.maslowcnc.com/t/new-frame-build-experiences/2766>\
**Category:** Frame\
**Created:** [March 19, 2018, 12:13pm UTC](https://forums.maslowcnc.com/t/new-frame-build-experiences/2766 "2018-03-19T12:13:54Z")\
**Posts on this page:** 1\
**Showing post:** 10

<div class="post-metadata">

**Author:** ![Weps](https://avatars.discourse-cdn.com/v4/letter/w/ce73a5/32.png) [@Weps](https://forums.maslowcnc.com/u/Weps)\
**Post date:** [March 20, 2018, 3:05am UTC](https://forums.maslowcnc.com/t/new-frame-build-experiences/2766/10 "2018-03-20T03:05:02Z")

</div>

> [@blurfl](#):
>
> Do they offer a thinner version?

Sadly, no…but maybe somewhere else does? Moving Table Sled discussion to its own topic here:

> [@Possible "Table Round" Sled](https://forums.maslowcnc.com/t/possible-table-round-sled/2780):
>
> I intend to explore the possibility of using a ready made table top as a sled for my Maslow. The intent is something that could skip the temporary sled and be made along with the frame while people are waiting for their kits to arrive: [https://www.homedepot.com/p/Edge-Glued-Round-Common-1-in-x-17-3-4-in-Actual-1-0-in-x-17-75-in-680435/202017011](https://www.homedepot.com/p/Edge-Glued-Round-Common-1-in-x-17-3-4-in-Actual-1-0-in-x-17-75-in-680435/202017011) As with anything there are some trade-offs. The table round is the correct diameter and the edges are already rounded. It is thicker than the stock s…

---

_[View the full topic](https://forums.maslowcnc.com/t/new-frame-build-experiences/2766)._
