# NEW POLL! What version of Ground Control and Firmware Do You Use? **URL:** \ **Category:** Software\ **Tags:** groundcontrol, firmware\ **Created:** [August 5, 2019, 4:36pm UTC](https://forums.maslowcnc.com/t/new-poll-what-version-of-ground-control-and-firmware-do-you-use/10752 "2019-08-05T16:36:37Z")\ **Posts on this page:** 8\ **Page:** 1
**Author:** ![WoodCutter4](https://avatars.discourse-cdn.com/v4/letter/w/bc79bd/32.png) [@WoodCutter4](https://forums.maslowcnc.com/u/WoodCutter4)\ **Post date:** [August 5, 2019, 4:36pm UTC](https://forums.maslowcnc.com/t/new-poll-what-version-of-ground-control-and-firmware-do-you-use/10752/1 "2019-08-05T16:36:38Z")
**What version of Ground Control and firmware do you use?** (FYI - polls can’t do write in answers and too many to list so select the range that pertains to you. If you use custom firmware, please select the range that is in sync with your custom firmware. **If you feel so inclined, comment below the specific version.** Also, if you use the github master, regardless of current release, comment that below and just vote v1.26) _Poll ([view on site](https://forums.maslowcnc.com/t/new-poll-what-version-of-ground-control-and-firmware-do-you-use/10752/1))_ . **Will you upgrade your current firmware?** _Poll ([view on site](https://forums.maslowcnc.com/t/new-poll-what-version-of-ground-control-and-firmware-do-you-use/10752/1))_ ---
**Author:** ![WoodCutter4](https://avatars.discourse-cdn.com/v4/letter/w/bc79bd/32.png) [@WoodCutter4](https://forums.maslowcnc.com/u/WoodCutter4)\ **Post date:** [August 5, 2019, 4:38pm UTC](https://forums.maslowcnc.com/t/new-poll-what-version-of-ground-control-and-firmware-do-you-use/10752/2 "2019-08-05T16:38:53Z")
Till Sunday at 11:59 PM. ---
**Author:** ![Gero](https://yyz1.discourse-cdn.com/flex031/user_avatar/forums.maslowcnc.com/gero/32/17487_2.png) [@Gero](https://forums.maslowcnc.com/u/Gero)\ **Post date:** [August 5, 2019, 7:33pm UTC](https://forums.maslowcnc.com/t/new-poll-what-version-of-ground-control-and-firmware-do-you-use/10752/3 "2019-08-05T19:33:10Z")
Master (1.27) missing, can’t vote 😜 ---
**Author:** ![WoodCutter4](https://avatars.discourse-cdn.com/v4/letter/w/bc79bd/32.png) [@WoodCutter4](https://forums.maslowcnc.com/u/WoodCutter4)\ **Post date:** [August 5, 2019, 7:33pm UTC](https://forums.maslowcnc.com/t/new-poll-what-version-of-ground-control-and-firmware-do-you-use/10752/4 "2019-08-05T19:33:42Z")
I left if off intentionally. Its not “official” 🙂 Didn’t want people to think they missed some announcement. ---
**Author:** ![dlang](https://yyz1.discourse-cdn.com/flex031/user_avatar/forums.maslowcnc.com/dlang/32/859_2.png) [@dlang](https://forums.maslowcnc.com/u/dlang)\ **Post date:** [August 5, 2019, 7:48pm UTC](https://forums.maslowcnc.com/t/new-poll-what-version-of-ground-control-and-firmware-do-you-use/10752/5 "2019-08-05T19:48:10Z")
have an options 'github master (experimental) ---
**Author:** ![WoodCutter4](https://avatars.discourse-cdn.com/v4/letter/w/bc79bd/32.png) [@WoodCutter4](https://forums.maslowcnc.com/u/WoodCutter4)\ **Post date:** [August 5, 2019, 7:48pm UTC](https://forums.maslowcnc.com/t/new-poll-what-version-of-ground-control-and-firmware-do-you-use/10752/6 "2019-08-05T19:48:53Z")
Thanks, guys. Next time 🙂 Can’t edit polls after 5 min. ---
**Author:** ![JohnC](https://avatars.discourse-cdn.com/v4/letter/j/9de0a6/32.png) [@JohnC](https://forums.maslowcnc.com/u/JohnC)\ **Post date:** [August 6, 2019, 1:13am UTC](https://forums.maslowcnc.com/t/new-poll-what-version-of-ground-control-and-firmware-do-you-use/10752/7 "2019-08-06T01:13:06Z")
I would have hit 1.27 if it were a thing. The bleeding edge always gets the fastest support.👍 ---
**Author:** ![bar](https://yyz1.discourse-cdn.com/flex031/user_avatar/forums.maslowcnc.com/bar/32/10_2.png) [@bar](https://forums.maslowcnc.com/u/bar)\ **Post date:** [August 9, 2019, 10:25am UTC](https://forums.maslowcnc.com/t/new-poll-what-version-of-ground-control-and-firmware-do-you-use/10752/8 "2019-08-09T10:25:18Z")
1.27 is officially out!